Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GOLD STAR METALS, LLC.

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of GOLD STAR METALS, LLC. in 15911 WOOD DRIVE, CHANNELVIEW, TX 77530 (NAICS 423930). OSHA activity number 346407166.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Gold Star Metals, LLC. — free Get an email when a new federal OSHA severe-injury report for Gold Star Metals, LLC. is published. One employer, no account, unsubscribe in one click.
Site address
15911 WOOD DRIVE
City
CHANNELVIEW
State
TX
ZIP
77530
Mailing
15911 WOOD DRIVE, CHANNELVIEW, TX 77530
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423930
Employees
55
Ownership type
A

7 citations on file for this inspection.

1910.178 O06

Other-than-serious Gravity 10 1 instance 1 exposed
Issued
Jun 6, 2023
Abate by
Jun 12, 2023
Penalty
Initial $14,063 · Current $14,063
1910.178(o)(6)  Extreme care shall be used when tilting the load forward or backward, particularly when high tiering. Tilting forward with load engaging means elevated shall be prohibited except to pick up a load. An elevated load shall not be tilted forward except when the load is in a deposit position over a rack or stack. When stacking or tiering, only enough backward tilt to stabilize the load shall be used.  On or about December 22, 2022, the driver was standing next to the truck tires while a forklift was loading a metal coil exposing the employee to struck-by hazards.
Recent events (3)
  • — F (O) $14063
  • — C (S) $14063
  • — Z (S) $14063

1910.134 C01

Other-than-serious Gravity 5 1 instance 5 exposed
Issued
Jun 6, 2023
Abate by
Jun 26, 2023
Penalty
Initial $10,046 · Current $7,032 Reduced
29 CFR  1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use.  On or about December 23, 2022, employees wearing respirators while using a cutting torch without the employer having developed and implemented a written respirator program.
Recent events (2)
  • — I (O) $7032.2
  • — Z (S) $10046

1910.134 E01

Other-than-serious Gravity 5 5 instances 5 exposed
Issued
Jun 6, 2023
Abate by
Jun 26, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was required to use the respirator in the workplace.   On or about December 23, 2022, the employer did not provide a medical evaluation before employees were wore respirators while using a torch at the worksite.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.134 F01

Other-than-serious Gravity 5 5 instances 5 exposed
Issued
Jun 6, 2023
Abate by
Jun 26, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.134(f)(1): The employer did not ensure that an employee using a tight-fitting facepiece respirator was fit tested prior to initial use of the respirator, whenever a different respirator facepiece was used, and at least annually thereafter.  On or about December 23, 2022, the employer did not provide a fit-test for employees required to wear respirators while using a torch at the worksite.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.178 M07

Other-than-serious Gravity 10 1 instance 1 exposed
Issued
Jun 6, 2023
Abate by
Jun 12, 2023
Penalty
Initial $14,063 · Current $0 Reduced
29 CFR  1910.178(m)(7): Wheel blocks were not in place to prevent movement of truck and trailer while loading and unloading.   On or about December 22, 2022, employees were loading a metal coil into a trailer without placing wheel blocks under the tires.
Recent events (3)
  • — F (O) $0
  • — C (S) $14063
  • — Z (S) $14063

1910.1200 E01

Other-than-serious Gravity 5 1 instance 55 exposed
Issued
Jun 6, 2023
Abate by
Jun 26, 2023
Penalty
Initial $8,036 · Current $5,625 Reduced
29 CFR  1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met.   On or about December 23, 2022, employees were working with chemicals, such as, but not limited to, oxygen, StarFlame C cutting fuel, and diesel fuel products without the employer having a hazard communication program.
Recent events (2)
  • — I (O) $5625.2
  • — Z (S) $8036

1910.1200 H01

Other-than-serious Gravity 5 1 instance 1 exposed
Issued
Jun 6, 2023
Abate by
Jun 26, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(h)(1):Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area.  On or about December 23, 2022, employees were working with chemicals, such as, but not limited to, oxygen, StarFlame C cutting fuel, and diesel fuel products without the employer providing hazard communication training.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346407166.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.