2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: SHURE-LINE ELECTRICAL, INC.

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of SHURE-LINE ELECTRICAL, INC. in 400 MILL ROAD, WILMINGTON, DE 19806 (NAICS 238210). OSHA activity number 346670326.

Watch Shure-Line Electrical, INC. — free Get an email when a new federal OSHA severe-injury report for Shure-Line Electrical, INC. is published. One employer, no account, unsubscribe in one click.
Site address
400 MILL ROAD
City
WILMINGTON
State
DE
ZIP
19806
Mailing
P. O. BOX 249, KENTON, DE 19955
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238210
Employees
12
Ownership type
A

3 citations on file for this inspection.

1926.501 B14

Other-than-serious Gravity 10 4 instances 12 exposed
Issued
Abate by
Penalty
Initial $12031.00 · Current $9625.00 Reduced
29 CFR  1926.501(b)(14): Each employee working on, at, above, or near wall openings (including those with chutes attached), where the outside bottom edge of the wall opening was 6 feet (1.8 m) or more above lower levels and the inside bottom edge of the wall opening is less than 39 inches (1.0 M) above the walking/working surface, was not protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system.   a) 400 Mill Road Wilmington, DE 19806 (Third floor): On or about May 1, 2023, and days prior, employees were exposed to fall hazards when the employer failed to ensure wood framed guardrail systems were properly installed with a top edge height of the top rail 42 inches plus or minus 3 inches.   b) 400 Mill Road Wilmington, DE 19806 (fourth floor): On or about May 1, 2023, and days prior, employees were exposed to fall hazards when the employer failed to ensure wood framed guardrail systems were properly installed with a top edge height of the top rail 42 inches plus or minus 3 inches.   c) 400 Mill Road Wilmington, DE 19806 (Stairwells): On or about May 1, 2023, and days prior, employees were exposed to fall hazards when the employer failed to ensure a top rail were properly installed with a top edge height of the top rail 42 inches plus or minus 3 inches.   d) 400 Mill Road Wilmington, DE 19806 (elevator shaft next to staircase 004): On or about May 1, 2023, and days prior, employees were exposed to fall hazards when the employer failed to ensure a top rail were properly installed with a top edge height of top rail 42 inches plus or minus 3 inches.
Recent events (2)
  • — I (O) $9624.8
  • — Z (S) $12031

1926.502 B02

Other-than-serious Gravity 10 3 instances 12 exposed
Issued
Abate by
Penalty
Initial $12031.00 · Current $9625.00 Reduced
29 CFR 1926.502(b)(2): Midrails, screens, mesh, intermediate vertical members, or equivalent intermediate structure members were not installed between the top edge of the guardrail system and the walking/working surface when there was no wall or parapet wall at least 21 inches (53 cm) high.  a) 400 Mill Road Wilmington, DE 19806 (Third floor): On or about May 1, 2023, and days prior, employees were exposed to fall hazards when the employer failed to ensure wood framed guardrail systems were properly installed with a mid-rail, screen, mash, or intermediate vertical member edge height of 21 inches.   b) 400 Mill Road Wilmington, DE 19806 (Fourth floor): On or about May 1, 2023, and days prior, employees were exposed to fall hazards when the employer failed to ensure wood framed guardrail systems were properly installed with a mid-rail, screen, mash, or intermediate vertical member edge height of 21 inches.
Recent events (2)
  • — I (O) $9624.8
  • — Z (S) $12031

1926.503 A01

Other-than-serious Gravity 5 1 instance 12 exposed
Issued
Abate by
Penalty
Initial $10313.00 · Current $8250.00 Reduced
29 CFR  1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a) 400 Mill Road Wilmington, DE 19806: On or about May 1, 2023, and days prior, employees were exposed to fall hazards when they were not adequately trained in proper fall protection standards, methods, and concepts which resulted in several hazardous conditions that exposed employees to fall hazards when they were performing construction activities.
Recent events (2)
  • — I (O) $8250.4
  • — Z (S) $10313

View SHURE-LINE ELECTRICAL, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346670326.