Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: D. E LORENZOS AUTO SALES LLC

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of D. E LORENZOS AUTO SALES LLC in 4256 E 10 LANE, HIALEAH, FL 33013 (NAICS 811121). OSHA activity number 346742463.

Watch D. E Lorenzos Auto Sales LLC — free Get an email when a new federal OSHA severe-injury report for D. E Lorenzos Auto Sales LLC is published. One employer, no account, unsubscribe in one click.
Site address
4256 E 10 LANE
City
HIALEAH
State
FL
ZIP
33013
Mailing
4256 E 10 LANE, HIALEAH, FL 33013
Inspection type
Federal Agency (M)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
811121
Employees
4
Ownership type
A

8 citations on file for this inspection.

1910.215 A04

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:    On or about May 25, 2023, and at times prior to, at 4256 E 10 Lane Hialeah, FL 33013, an employee was exposed to a caught in hazard when sharpening a drill bit on a bench mounted grinder where the work rest was approximately 1 inch away from the wheel of the surface.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.243 C03

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.243(c)(3): Abrasive wheels used on vertical portable grinder(s) (right angle head grinders) were not provided with safety guard(s) having a maximum exposure angle of 180 degrees and located between the operator and wheel:  On or about May 25, 2023, and at times prior to, at 4256 E 10 Lane, Hialeah, FL 33013, an employee was exposed to a struck by hazard when using a Dewalt angle grinder (Model # DWE402) for grinding operations that lacked a guard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.243 C04

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $3349.00 · Current $3349.00
29 CFR  1910.243(c)(4): The top half of the wheel of portable grinding machine(s) was not enclosed:  On or about May 25, 2023, and at times prior to, at 4256 E 10 Lane, Hialeah, FL 33013, an employee was exposed to a struck by hazard when using an air cut off tool to grind down welds that lacked a guard.
Recent events (2)
  • — I (S) $3349
  • — Z (S) $3349

1910.252 B02 I A

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.252(b)(2)(i)(A): Helmets or hand shields were not used during all arc welding or arc cutting operations:  On or about May 25, 2023, and at times prior to, at 4256 E 10 Lane, Hialeah, FL 33013, an employee was exposed to arch flash and welding splatter when using a Lincoln Electric PRO MIG 180 to weld without eye and face protection.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.252 B03

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.252(b)(3): Employees exposed to the hazards created by welding, cutting, or brazing operations were not protected by personal protective equipment in accordance with the requirements of 29 CFR 1910.132: Note:  Appropriate protective clothing required for welding operation will vary with the size, nature and location of the work to be performed.  On or about May 25, 2023, and at times prior to, at 4256 E 10 Lane, Hialeah, FL 33013, an employee was exposed to arch flash and welding splatter when using a Lincoln Electric PRO MIG 180 without personal protective equipment such as, but not limited to gloves, long sleeves, long pants, and leather apron.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.253 B05 II I

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.253(b)(5)(ii)(I): Cylinders were not kept far enough away from the actual welding or cutting operation so that sparks, hot slag, or flame would not reach them:  On or about May 25, 2023, and at times prior to, at 4256 E 10 Lane, Hialeah, FL 33013, an employee was exposed to a fire hazard due to an oxygen cylinder being improperly stored approximately 6 feet and 6 inches away from grinding operations.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(g)will be met:  On or about May 25, 2023, and at times prior to, at 4256 E 10 Lane, Hialeah, FL 33013, employees were exposed to a chemical hazard while working with hazardous chemicals for which a safety data sheet was not available, such as, but was not limited to, compressed gases.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 G08

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.1200(g)(8):  The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical:  On or about May 25, 2023, and at times prior to, at 4256 E 10 Lane, Hialeah, FL 33013, employees were exposed to a chemical hazard while working with hazardous chemicals for which a safety data sheet was not available such as, but was not limited to, compressed gases.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346742463.