HARTSELLE, AL —
OSHA Inspection: EXCEL INTERIOR DOOR, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of EXCEL INTERIOR DOOR, LLC in 1101 YOUNG DRIVE SOUTHEAST, HARTSELLE, AL 35640 (NAICS 321911). OSHA activity number 346828585.
Where did this inspection happen?
- Establishment
- EXCEL INTERIOR DOOR, LLC
- Site address
- 1101 YOUNG DRIVE SOUTHEAST
- City
- HARTSELLE
- State
- AL
- ZIP
- 35640
- Mailing
- 1101 YOUNG DRIVE SOUTHEAST, HARTSELLE, AL 35640
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321911
- Employees
- 115
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.138 A
- Issued
- Abate by
- Penalty
- Initial $14063.00 · Current $11859.00 Reduced
General-duty citation text
29 CFR 1910.138(a):The employer did not select and require employee(s) to use appropriate hand protection when employees' hands were exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasion; punctures; chemical burns; thermal burns; and harmful temperature extremes: (a) On or about 07/06/2023 and at times prior thereto and times there after- Production Department Area, employees cutting wood pieces with the Powermatic Trim Saw machine were not using proper hand protection.
Recent events (2)
- — I (O) $11859
- — Z (S) $14063
1910.138 B
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.138(b): The employer did not base the selection of the appropriate hand protection on an evaluation of the performance characteristics of the hand protection relative to the task(s) to be performed, conditions present, duration of use, and the hazards and potential hazards identified: (a) On or about 7/6/2023 and at time prior thereto - Production Department, location E003, Trim saw (Lay-up Saw), Powermatic Mc Minnville, TN. Model No 66, Serial No 95661825, the employer did not perform a hazard assessment for employees exposing them to amputation hazard(s).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C01
- Issued
- Abate by
- Penalty
- Initial $10046.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: (a) On or about 7/6/2023 and at time prior thereto- Production Department, location E003, Trim saw (Lay-up Saw), Powermatic Mc Minnville, TN. Model No 66, Serial No 95661825, the upper portion of the saw was not completely guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $10046
1904.41 A02
- Issued
- Penalty
- Initial $2009.00 · Current $2000.00 Reduced
General-duty citation text
29 CFR 1904.41(a)(2): Annual electronic submission of OSHA Form 300A Summary of Work-Related Injuries and Illnesses by establishments with 20 or more employees but fewer than 250 employees in designated industries. If your establishment had 20 or more employees but fewer than 250 employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix A to subpart E of this part, then you must electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form: (a) At Excel Interior Door, Inc, on or about 7/13/2023, the employer failed during calendar year 2023, to electronically submit information from their 2022 OSHA Form 300A or equivalent by 03/02/2023; the establishment employed 75 employees and has North American Industry Classified System (NAICS) - 321911.
Recent events (2)
- — I (O) $2000
- — Z (O) $2009
More inspections in this industry (NAICS 321911)
WEST HAVEN, UT—2026-07-08
MURPHY DOOR
MILACA, MN—2026-07-01
111513 - CUSTOM PANEL DOORS INC
NASHVILLE, TN—2026-06-23
CENTRAL WOODWORK
MORGANTON, NC—2026-06-01
161281 - APPWOOD, LLC
MOUNT JOY, PA—2026-05-19
CARTER LUMBER COMPANY
More inspections in AL
CLANTON, AL—2026-07-13
UBIQUE TECHNOLOGIES, INC.
IRONDALE, AL—2026-07-13
FATHER NATURE LANDSCAPES OF BIRMINGHAM, INC.
GARDENDALE, AL—2026-07-09
ANDINO'S IRON WORKERS, LLC
CULLMAN, AL—2026-07-09
ALFREDO PICHARDO BLANCO
MOBILE, AL—2026-07-09
FLEXICREW TECHNICAL, LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346828585.