Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DRM INDUSTRIES CORP.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of DRM INDUSTRIES CORP. in 231 WEST ADAMS STREET, LAKE DELTON, WI 53940 (NAICS 423840). OSHA activity number 346942204.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch DRM Industries Corp. — free Get an email when a new federal OSHA severe-injury report for DRM Industries Corp. is published. One employer, no account, unsubscribe in one click.
Site address
231 WEST ADAMS STREET
City
LAKE DELTON
State
WI
ZIP
53940
Mailing
231 WEST ADAMS STREET, WISCONSIN DELLS, WI 53965
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423840
Employees
34
Ownership type
A

5 citations on file for this inspection.

1910.134 E01

Serious Gravity 1 1 instance 3 exposed
Issued
Oct 31, 2023
Penalty
Initial $4,687 · Current $3,281 Reduced

Hazardous substances 25879135

29 CFR  1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  On or about August 28, 2023, employees did not have a respirator medical evaluation  when it was mandatory for employees to wear a  half mask elastomeric respirator when grinding and sanding aluminum alloy metal pieces.
Recent events (2)
  • — I (S) $3280.9
  • — Z (S) $4687

1910.212 A03 II

Serious Gravity 5 1 instance 3 exposed
Issued
Oct 31, 2023
Penalty
Initial $9,376 · Current $6,563 Reduced
29 CFR  1910.212(a)(3)(ii):Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):  On or about August 24, 2023, the shear guard opening did not protect from a crushing injury from the shear hold downs.
Recent events (2)
  • — I (S) $6563.2
  • — Z (S) $9376

1910.134 F01

Other-than-serious 1 instance 2 exposed
Issued
Oct 31, 2023
Penalty
Initial $0 · Current $0

Hazardous substances 25879135

29 CFR  1910.134(f)(1):The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT):  On or about August 28, 2023, employees did not have a respirator fit test when it was mandatory for employees to wear a half mask elastomeric respirator when grinding and sanding aluminum alloy metal pieces.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.134 G01 I A

Other-than-serious 1 instance 2 exposed
Issued
Oct 31, 2023
Penalty
Initial $0 · Current $0

Hazardous substances 25879135

29 CFR  1910.134(g)(1)(i)(A):Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function:  On or about August 28, 2023, employees were not clean shaven when it was mandatory for employees to wear a half mask elastomeric respirator when grinding and sanding aluminum alloy metal pieces.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 H03 II

Other-than-serious 1 instance 3 exposed
Issued
Oct 31, 2023
Abate by
Nov 15, 2023
Penalty
Initial $0 · Current $0

Hazardous substances 25879135

29 CFR  1910.1200(h)(3)(ii):Employee training did not include the physical and health hazards of the chemicals in the work area:  On or about August 28, 2023, employees welding, grinding and sanding aluminum alloy containing chromium salts and nickel were not trained on the health health hazards of aluminum alloy, such as sensitization.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View DRM Industries Corp.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346942204.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.