Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: FORGE BUILDING COMPANY, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of FORGE BUILDING COMPANY, LLC in 1653 STATE ST, EAGLE, ID 83616 (NAICS 236220). OSHA activity number 346962442.

Watch Forge Building Company, LLC — free Get an email when a new federal OSHA severe-injury report for Forge Building Company, LLC is published. One employer, no account, unsubscribe in one click.
Site address
1653 STATE ST
City
EAGLE
State
ID
ZIP
83616
Mailing
2785 NORTH BOGUS BASIN ROAD, BOISE, ID 83702
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
5
Ownership type
A

9 citations on file for this inspection.

1926.403 B02

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $6026.00 · Current $3000.00 Reduced
29 CFR  1926.403(b)(2):Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification:  (a) On September 7th, 2023 and times prior to, the controlling employer did not ensure that its sub-contractor employees were protected from electrical shock, as extension cords used to provide power from a junction box to multiple parts of the property were connected in a series and spanned an approximate total distance of 700 feet.  Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
  • — I (S) $3000
  • — Z (S) $6026

1926.405 A02 II I

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.405(a)(2)(ii)(I):Flexible cords and cables used for temporary wiring were not protected from damage:  (a) On September 7th, 2023 and times prior to, the controlling employer did not ensure that its sub-contractor employees were protected from electrical shock, as an extension cord was run through a hole cut in an aluminum wall. The hole was not protected and had multiple sharp portions that could damage the cords insulation.  Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.416 E02

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.416(e)(2):Extension cords were fastened with staples, hung from nails, or suspended by wire:  (a) On September 7th, 2023 and times prior, he controlling employer did not ensure that its sub-contractor employees were protected as multiple extension cords were suspended by rope from the adjacent building in order to run power to different portions of the property.  Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $12055.00 · Current $8000.00 Reduced
29 CFR  1926.451(b)(1):Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii)  (a): On September 7th, 2023 and times prior, the employer did not ensure that its sub-contractor protected its employees from falls while applying stucco from the second level of the scaffolding.  Multiple scaffolding platforms only had two of the required 4 planks.   Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
  • — I (S) $8000
  • — Z (S) $12055

1926.451 G04 I

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.451(g)(4)(i):Guardrail systems were not installed along all open sides and ends of platforms.  (a): On September 7th, 2023 and times prior, the controlling employer did not ensure that its sub-contractor employees were protected from falls while working on scaffolding that did not have guardrails on open sides, leading to potential falls of 13.5 feet.   Abatement Note: Abatement certification and documentation is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 E01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $12055.00 · Current $8000.00 Reduced
29 CFR  1926.451(e)(1):When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used.  Crossbraces were used as a means of access.  (a): On September 7th, 2023 and times prior, the controlling employer did not ensure that its sub-contractor employees were protected from falls while accessing scaffolding platforms. Employees used cross braces for access and egress purposes.   Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
  • — I (S) $8000
  • — Z (S) $12055

1926.451 E09 IV

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.451(e)(9)(iv):Cross braces on tubular welded frame scaffolds were used as a means of access or egress.  (a) On September 7th, 2023 and times prior, the employer did not ensure that its subcontractor protected its employees from falls while accessing the lower and upper levels of scaffolding. Employees used the frames of the scaffold.  Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 H02 II

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $6026.00 · Current $3000.00 Reduced
29 CFR  1926.451(h)(2)(ii): A toeboard was not erected along the edge of platforms more than 10 feet (3.1 m) above lower levels for a distance sufficient to protect employees below:  (a) On September 7th, 2023 and times prior, the controlling employer did not ensure that its sub-contractor protected employees working below the scaffold from falling materials such as a bucket with stucco and application tools.  Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
  • — I (S) $3000
  • — Z (S) $6026

1926.452 C02

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $12055.00 · Current $8000.00 Reduced
29 CFR  1926.452(c)(2):Tubular welded frames and panels were not braced by cross, horizontal, or diagonal braces, or combination thereof, which would have secured vertical members together laterally:  (a) On September 7th, 2023 and times prior, the employer did not ensure that its sub-contractor protected its employees while applying stucco from the second and first level of a scaffold.  Bracing was missing in several areas throughout the scaffold.    Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
  • — I (S) $8000
  • — Z (S) $12055

View FORGE BUILDING COMPANY, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346962442.