OSHA Inspection: CNB CONTRACTING CORP.

Issued

2024-05-02 00:00:00

Abate by

2024-05-21 00:00:00

Penalty

Initial $10163.00 · Current $10163.00

General-duty citation text

29 CFR 1910.28(b)(6)(ii): The employer did not ensure that each employee 4 feet (1.2 m) or more above dangerous equipment must be protected from falling by one of the systems listed in 29 CFR 1910.28(b)(6)(ii)(A)-(D).  On or about November 6th, 2023 Location: 1140 Grinnell Pl, Bronx, NY 10474  a) Employee was exposed to a fall hazard of approximately 5' onto a moving conveyor at the bottom of the stone bin while hosing down the stone bin.

Issued

2024-05-02 00:00:00

Abate by

2024-05-21 00:00:00

Penalty

Initial $5807.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.134(c)(2)(i): The employer did not determine if the voluntary use of a respirator did not in itself create a hazard:   On or about November 6th, 2023 Location: 1140 Grinnell Pl, Bronx, NY 10474  a) Employees voluntarily wearing elastomeric half-mask respirators during daily loading and operation of volumetric concrete mixer truck was not determine if create a hazard. Employer does not have a written respiratory program.

Issued

2024-05-02 00:00:00

Abate by

2024-05-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.134(c)(2)(ii): The employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored, and maintained so that its use does not present a health hazard to the user:   On or about November 6th, 2023 Location: 1140 Grinnell Pl, Bronx, NY 10474  a)For employees voluntarily wearing elastomeric half-mask respirators during daily loading and operation of volumetric concrete mixer trucks. was not determine if create a hazard. Employer does not have a written respiratory program.

Issued

2024-05-02 00:00:00

Abate by

2024-05-21 00:00:00

Penalty

Initial $10163.00 · Current $7985.00 Reduced

General-duty citation text

29 CFR  1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:   On or about November 6th, 2023 Location: 1140 Grinnell Pl, Bronx, NY 10474  a) Employees were exposed to hazardous energy sources because the employer did not develop, document, and utilize energy control procedures, including, but not limited to procedures for cleaning and servicing of the Zimmerman volumetric concrete mixer truck.

Issued

2024-05-02 00:00:00

Abate by

2024-05-21 00:00:00

Penalty

Initial $10163.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees:  On or about November 6th, 2023 Location: 1140 Grinnell Pl, Bronx, NY 10474  a) The employer did not provide authorized and affected employees, such as drivers/operators, with training in the purpose and function of the energy control program, including, but not limited to, energy control procedures needed for safe cleaning and servicing of the Zimmerman volumetric concrete mixer.

Issued

2024-05-02 00:00:00

Abate by

2024-05-21 00:00:00

Penalty

Initial $10163.00 · Current $10163.00

General-duty citation text

29 CFR  1910.219(c)(2): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting:  On or about November 6th, 2023 Location: 1140 Grinnell Pl, Bronx, NY 10474  a) Employee #1 and #3 were exposed to an unguarded rotating shaft that drives the air-actuated vibrator levers of a volumetric concrete mixer truck. Shaft was located at 56 inches (4.7 feet) from the ground.  b) Employee #4 was exposed to an unguarded rotating shaft that drives the air-actuated vibrator levers of a volumetric concrete mixer truck. Shaft was located at 56 inches (4.7 feet) from the ground.