OSHA Inspection: LONGHORN FABRICATION INC.

Issued

2024-02-07 00:00:00

Abate by

2024-03-05 00:00:00

Penalty

Initial $14518.00 · Current $14518.00

General-duty citation text

29 CFR 1910.147(c)(4)(ii)(C): The energy control procedure did not clearly and specifically outline the steps for placement, removal and transfer of lockout devices or tagout devices and the responsibility for them:  (a) On or about November 21, 2023, the employer did not ensure the energy control of the lockout/tagout specific procedures were develop and followed for the Steelman bake powder coat oven.  Employees were exposed to an amputation hazard.

Issued

2024-02-07 00:00:00

Abate by

2024-03-05 00:00:00

Penalty

Initial $14518.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(ii): The employer did not certify that the periodic inspections have been performed. The certification did not identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection:  (a)	On or about November 21, 2023, the employer did not ensure the energy control periodic inspections were performed and certified of the Lockout/tagout procedures.

Issued

2024-02-07 00:00:00

Abate by

2024-03-05 00:00:00

Penalty

Initial $14518.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.147(d)(4)(i): Lockout or tag out devices were not affixed to each energy isolating device by authorized employees:  (a)	On or about November 21, 2023, where employees working in the Paint department, on the small oven, Steelman bake powder coat oven, model: 10914 GSP, serial:  92163 and were exposed to amputation hazards.

Issued

2024-02-07 00:00:00

Abate by

2024-03-05 00:00:00

Penalty

Initial $14518.00 · Current $14518.00

General-duty citation text

29 CFR  1910.303(b)(7)(i):Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings shall be effectively closed to afford protection substantially equivalent to the wall of the equipment:  On or about November 21, 2023, the employer did not fill-in the unused openings on the Steelman small bake powder coat oven and Steelman large bake powder coat oven   (a)	Paint shop, Steelman small bake oven, model no. 10914GSP, serial no. 92163 (b)	Paint shop. Steelman large oven.  Employer identifies as ID#8-5'X10'X26'.

Issued

2024-02-07 00:00:00

Abate by

2024-03-05 00:00:00

Penalty

Initial $1165.00 · Current $1165.00

General-duty citation text

29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees:  (a)	On or about November 21, 2023, where the employer did not ensure the energy control periodic inspections were performed and certified of the Lockout/tagout procedures.