BOISE, ID —
OSHA Inspection: DIXON CONTAINER CO.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of DIXON CONTAINER CO. in 2255 BRANIFF ST., BOISE, ID 83716 (NAICS 322211). OSHA activity number 347705154.
Where did this inspection happen?
- Establishment
- DIXON CONTAINER CO.
- Site address
- 2255 BRANIFF ST.
- City
- BOISE
- State
- ID
- ZIP
- 83716
- Mailing
- 3210 E AMITY RD, BOISE, ID 83716
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322211
- Employees
- 20
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Abate by
- Penalty
- Initial $8067.00 · Current $4100.00 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) On and at times prior to August 22, 2024, the specific procedures were not utilized when employees changed the dies on the Hooper Swift 900 while the machine was energized and were exposed to hazards associated with moving parts. Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
- — I (S) $4100
- — Z (S) $8067
1910.147 D02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.147(d)(2): The machine or equipment was not turned off or shut down using the procedures established for the machine or equipment: (a) On and at times prior to August 22, 2024, employees were exposed to hazards associated with moving parts while they changed the dies on the Hooper Swift 900 while the machine was energized. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work (per the 1910.147(d)(2) requirements). As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from machine servicing hazards. Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I A
- Issued
- Abate by
- Penalty
- Initial $8067.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A):Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation (a) On August 22, 2024, and times prior thereto employees were exposed to potential hazardous energies while changing die's changing on a Hooper Swift 900. Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
- — I (S) $0
- — Z (S) $8067
1910.147 C07 I B
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B):Affected employees were not instructed in the purpose and use of the energy control procedure: (a) On or before August 22, 2024 operators of the Hooper Swift 900 and employees in the area were exposed to potentially hazardous energies when dies of the machine were changed without receiving training. Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I C
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.147(c)(7)(i)(C):Employees whose work operations were in an area where energy control procedures were utilized were not instructed about the procedure: (a) On or before August 22, 2024 operators of the Hooper Swift 900 and employees in the area were exposed to potentially hazardous energies when dies of the machine were changed without receiving training. Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at DIXON CONTAINER CO.
BOISE, ID—2016-09-22 00:00:00
DIXON CONTAINER CO.
View DIXON CONTAINER CO.'s full OSHA safety record →
More inspections in this industry (NAICS 322211)
SAVAGE, MN—2026-07-08
111557 - BF NELSON CORPORATION
WEST CHESTER, OH—2026-07-08
GEORGIA PACIFIC CORRUGATED LLC
ALBERT LEA, MN—2026-07-01
111514 - INTERSTATE PACKAGING CORPORATION
STURTEVANT, WI—2026-07-01
ND PACKAGING LLC
FILER CITY, MI—2026-06-29
PACKAGING CORPORATION OF AMERICA
More inspections in ID
GOODING, ID—2026-07-10
DAHLGREN INDUSTRIAL INC.
MERIDIAN, ID—2026-07-10
IDAHO HOMES CONSTRUCTION LLC
MERIDIAN, ID—2026-07-10
DIAMOND CONCRETE, LLC
BOISE, ID—2026-07-09
POWERHOUSE ELECTRIC INC.
BOISE, ID—2026-07-09
MARK GUHO CONSTRUCTION COMPANY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347705154.