1,224,460Inspections Most recent open 2026-07-13 Last loaded 2026-07-16
Safety Incidents OSHA Severe Injury Reports · 2015–2025

MILFORD, OH —

OSHA Inspection: GREEN PLANET 21 INC

Referral inspection · Safety discipline

At a glance

On , OSHA opened a referral safety inspection of GREEN PLANET 21 INC in 999 TECH DRIVE, MILFORD, OH 45150 (NAICS 562920). OSHA activity number 348052283.

Watch Green Planet 21 INC — free Get an email when a new federal OSHA severe-injury report for Green Planet 21 INC is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
GREEN PLANET 21 INC
Site address
999 TECH DRIVE
City
MILFORD
State
OH
ZIP
45150
Mailing
999 TECH DRIVE, MILFORD, OH 45150

What kind of inspection was it?

Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
562920
Employees
13
Ownership type
A

Citations

4 citations on file for this inspection.

1910.9 B

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $14895.00 · Current $14000.00 Reduced

General-duty citation text

1910.9(b) Training. Standards in this part requiring training on hazards and related matters, such as standards requiring that employees receive training or that the employer train employees, provide training to employees, or institute or implement a training program, impose a separate compliance duty with respect to each employee covered by the requirement. The employer must train each affected employee in the manner required by the standard, and each failure to train an employee may be considered a separate violation.   a) On or about February 14, 2025, the employer failed to ensure that an employee operating a powered industrial truck was sufficiently trained to recognize and avoid a pinch point hazard created when removing a debris hopper from the product dump area. Specifically, the employee was not sufficiently trained to recognize a pinch point and to keep their hands out of that area, which resulted in exposure to crushing and amputation hazards.
Recent events (2)
  • — I (S) $14000
  • — Z (S) $14895

1910.178 M01

Deleted Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $14895.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.178(m)(1): Truck operations. Trucks shall not be driven up to anyone standing in front of a bench or other fixed object.  a) On or about February 14, 2025, the employer did not ensure that employees operating powered industrial trucks were not driving up to employees who were standing near a fixed object. While a powered industrial truck operator was removing a hopper from a metal frame box, another employee holding a plastic curtain had their hand caught between the hopper and the metal frame.
Recent events (2)
  • — I (S) $0
  • — Z (S) $14895

1910.178 O06

Deleted Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $14895.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.178(o)(6): Loading. Extreme care shall be used when tilting the load forward or backward, particularly when high tiering. Tilting forward with load engaging means elevated shall be prohibited except to pick up a load. An elevated load shall not be tilted forward except when the load is in a deposit position over a rack or stack. When stacking or tiering, only enough backward tilt to stabilize the load shall be used.  a) On or about February 14, 2025, the employer did not ensure that forklift operators used extreme care when tilting the load forward or backward. Employees were exposed to pinch point and caught in hazards when tilting the raised hoppers while standing to the side when pulling the hopper back into upright position.
Recent events (2)
  • — I (S) $0
  • — Z (S) $14895

1910.178 Q07

Deleted Serious Gravity 5 1 instance 5 exposed
Issued
Penalty
Initial $8511.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.178(q)(7): Maintenance of industrial trucks. Industrial trucks shall be examined before being placed in service, and shall not be placed in service if the examination shows any condition adversely affecting the safety of the vehicle. Such examination shall be made at least daily. Where industrial trucks are used on a round-the-clock basis, they shall be examined after each shift. Defects when found shall be immediately reported and corrected.  a) On or about February 14, 2025, the employer did not ensure that the Hyster Fortis Forklift - Model H60 FT (sit-down) with the back lights damaged, in that they were taped to be held in place and which had a damaged seat was removed from service until corrected.
Recent events (2)
  • — I (S) $0
  • — Z (S) $8511

More inspections at GREEN PLANET 21 INC

View GREEN PLANET 21 INC's full OSHA safety record →

More inspections in this industry (NAICS 562920)

More inspections in OH

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348052283.