OSHA Inspection: CORE TECH INTERNATIONAL CORPORATION

Issued

2026-03-10 00:00:00

Penalty

Initial $7093.00 · Current $4965.00 Reduced

General-duty citation text

29 CFR  1926.403(b)(2): Installation and use. Listed, labeled, or certified equipment shall be installed and used in accordance with instructions included in the listing, labeling, or certification.  On or about January 7, 2026 in front of the office in the break area tent: A receptacle box, intended to be installed in  a wall, was wired onto the end of an extension cord and was used to power the microwave.

Issued

2026-03-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1926.405(j)(1)(i): Fixtures, lampholders, lamps, rosettes, or receptacles had live parts normally exposed to employee contact:  On or about January 7, 2026, in front of the office in the management container : A receptacle box mounted on the end of an extension cord used to power the microwave had an open knockout hole.

Issued

2026-03-10 00:00:00

Abate by

2026-03-20 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  On or about January 7, 2026 in front of the office: Flexible cords were used as fixed wiring for the lights at the break area tent.

Issued

2026-03-10 00:00:00

Abate by

2026-03-20 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws:  On or about January 7, 2026 in front of the office in the break area tent: The outer insulation to the flexible cord used to power the lights was pulled from the junction box exposing the inner wiring.