Ventura, CA—Federal OSHA workplace-safety record

Ventura, CA

5 severe-injury reports between 2016-05-20 and 2025-04-10, 14 OSHA inspections, and 1,259 Form 300/301 injury filings on federal record in Ventura, California.

California operates its own OSHA-approved State Plan covering private-sector workplaces, so most enforcement in Ventura, CA is state-run. The federal OSHA records on this page cover only workplaces under federal jurisdiction — they are not a complete picture of workplace safety in the city.

5Severe injuries

4Hospitalizations

14OSHA inspections

1,259Injury filings

Employers with the most severe injuries in Ventura

# Employer Severe-injury reports

1 DCOR, LLC 2 2 C.D. Lyon, Inc. 1 3 Northrop Grumman Systems Corporation 1 4 PAE Applied Technologies, LLC 1

Example incidents

C.D. Lyon, Inc. VENTURA, CALIFORNIA · 2025-04-10 · Injured by object handled by person n.e.c.
Two steel plates (5 feet by 10 feet by 3/16 inch) had been rigged using a shackle, sling, and tagline, then positioned vertically at the ground level by a crane. An employee detached the rigging from the crane hook and two employees were stabilizing the load as it lowered to a 45-degree angle. As the plates were being lowered, they shifted and caught the left foot of one of the two employees against stacked plates. The employee's left tibia and fibula were broken.
Northrop Grumman Systems Corporation VENTURA, CALIFORNIA · 2025-01-23 · Struck by falling part of vehicle or machine, still attached
An employee was loading equipment onto a forklift when the shackle from the sling fell to the ground. While the employee was retrieving the shackle from under the forks, the moveable fork that was propped up on the shackle fell onto his left middle finger. The employee sustained a partial amputation to the fingertip.
DCOR, LLC VENTURA, CALIFORNIA · 2022-05-05 · Struck by object falling from vehicle or machinery-other than vehicle part
An employee was removing a standpipe with his hands on a wrench and bolt. Once the bolts were loosened, the standpipe flange slipped and fell on the employee's right forearm, crushing it.
DCOR LLC VENTURA, CALIFORNIA · 2018-02-07 · Compressed or pinched by shifting objects or equipment
An employee was replacing a valve in a process line using a chain fall. The employee's finger was caught between the new valve and the top of the flange crushing it and resulting in a partial amputation.
PAE Applied Technologies, LLC VENTURA, CALIFORNIA · 2016-05-20 · Direct exposure to electricity, greater than 220 volts
An employee was driving a boat in the open ocean when he was hit by a plasma fireball, suffering an electrical shock.

Browse every record via full-text search →
Back to all California OSHA records →
Source: federal OSHA Severe Injury Reports, inspections, and ITA Form 300/301 filings. Counts reflect federal jurisdiction only.