Caught in running equipment or machinery, unspecified · Cuts and abrasions or bruises
At a glance
Federal OSHA recorded a severe workplace injury
at JAYHAWK BOXES, INC, 1150 S UNION, FREMONT, NEBRASKA 68025
on — Cuts and abrasions or bruises, affecting the shoulder(s) and arm(s).
Final narrative
The employee was checking the ink level on a print department machine without shutting it down. As the employee reached in to check the ink tray, the employee's shirt was pulled into a roller or shaft. The employee's left arm and shoulder were subsequently pulled into the machine. The employee was able to pull the arm free, but suffered lacerations to the left arm and injured the shoulder. The employee was transported to Freemont Medical Center and then transferred to a hospital in Omaha.
HospitalizedShoulder(s) and arm(s)Printing machinery and equipment, unspecified
An employee was moving extension tables in the manufacturing area when the employee tripped over a table and fell. The employee sustained a compound fracture to the lower right leg.
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
On October 22, 2025, an employee was working to put a conveyor chain back on the track of a conveyor when their fingers were caught between the chain and the chain track, pulling their right hand into the sprocket. Four fingers were amputated.
An employee was cleaning the headers of the core machine using a hand drill with a brush attachment. His glove was caught on the brush shaft, resulting in amputation of the left middle fingertip.
An employee was operating a winder paper mill machine when their right index finger became caught in the machine. The finger was partially amputated at the first knuckle.
An employee was lubricating a chain and sprocket on a corrugator splicer. He lost his balance, and his right middle finger came into contact with the chain and sprocket. The fingertip was amputated at the nail bed.
An employee was entering a building and reached out to catch a closing door. The door closed on the employee's finger, resulting in the partial amputation of the fingertip and nailbed.
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.