Safety Incidents OSHA Severe Injury Reports · 2015–2025
105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31

Chemrite Copac, Inc.

Contact with hot objects or substances · Heat (thermal) burns, unspecified

Federal OSHA recorded a severe workplace injury at Chemrite Copac, Inc., 19725 W. Edgewood Drive, LANNON, WISCONSIN 53046 on — Heat (thermal) burns, unspecified, affecting the nonclassifiable.

Watch Chemrite Copac, Inc. — free Get an email when a new federal OSHA severe-injury report for Chemrite Copac, Inc. is published. One employer, no account, unsubscribe in one click.

Employee was sprayed with hot water while cleaning an inductor (a piece of filling equipment used to fill the containers of personal care products). The nozzle of the hose came loose and splashed the employee with the hot water, causing burns to the skin.

Hospitalized Nonclassifiable Water

OQ Chemicals

An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.

Husbe Zoaq

An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.

The Cumberland Rest Inc. dba Trinity Terrace

An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.

Mueller & Wilson Inc

An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.

Oklahoma Steel & Wire Co., LLC

An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.

Tri-Tech Laboratories

An employee was using an electric pallet jack to retrieve a chemical tote from a staging lane. He inserted the pallet jack under the tote and began to back up. After moving backward for approximately 15 feet, the employee tripped on a collapsible tote. As he fell, the pallet jack ran over his left foot. His ankle was lacerated and his foot was fractured.

John Paul Mitchell Systems Inc

An employee was installing network infrastructure at a client's distribution center. He was transporting a box measuring approximately 23 inches by 12 inches to a truck yard and walking along a narrow path adjacent to a trench that measured approximately 5.5 to 6 feet deep, 10 to 12 feet long, and 18 to 24 inches wide. Gravel on the path shifted beneath the employee's foot, causing him to lose balance and fall into the trench. He landed on his left side and struck a 4-inch PVC conduit pipe located at the bottom of the trench. The employee was hospitalized with fractures to his fourth, fifth, and sixth ribs on the left side.

Tri-Tech Labratories

An employee mixed sodium hydroxide pellets into a 55-gallon drum of hot water. A chemical reaction occurred and mixture splashed out of the drum, causing burns to the employee's face and neck. Personal protective equipment was not in place at the time.

Clean Control Corporation - Stephenville Plant

A line leader was crouched down observing the chain and sprocket on a carpet filling machine for maintenance or repair when another employee got his right index finger caught between the chain and sprocket. Skin and the fingernail were removed and the employee required surgical amputation of the fingertip to the first knuckle.

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Asher Enterprises, Inc.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

Consolidated Electrical Distributors Inc.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.