Otokumpu Stainless USA, LLC.

Employee 1 was operating a lift in a standing position. Employee 2 was operating a cherry picker and backing up through an aisle. The lift collided with the cherry picker and employee 1 fell off the lift after striking his right ankle on a wooden pallet that was on the cherry picker. The employee sustained a broken ankle.

An employee was operating a front-rider pallet jack from a freezer box to the loading dock when the vehicle collided with a stand-up forklift that was driving around a corner. The employee suffered multiple fractures in their left foot.

An employee was operating a forklift in reverse down an aisle when the vehicle collided with another forklift. The forks of the other forklift went into the employee's right leg, resulting in a right hairline leg fracture.

After moving empty containers with a forklift, an employee began to travel forward in the forklift. While re-entering the main aisle, the left fork struck the roll cage of an oncoming forklift that was travelling in reverse. This caused the injured employee's forklift to tip over onto a guardrail. The upper rail of the guardrail entered the top of the forklift's roll cage, pinning the employee's legs against the seat. The employee sustained a fractured leg.

An employee was operating a golf cart to retrieve and transport a ladder to the truck shop when they were struck by another vehicle at an intersection. The employee sustained head/brain injuries.

An employee fell while entering the building. The employee was hospitalized with a fractured ankle and required surgery.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was working to close a furnace door. The hydraulic mechanism that opens and closes the furnace door was non-operational and had been disconnected to allow the furnace door to be opened manually. As the employee was releasing the pins that held the door open, the door and the hydraulic cylinder fell, pinching their left hand between the hydraulic cylinder's base plate and the furnace. The employee suffered amputation of the little fingertip.

A rolling mill was shut down due to a cobble between two mill stands. The injured employee was cleaning the cobble from the delivery side of stand A, while another employee went to the control panel to move stand B and stand A moved instead. The injured employee's right thumb got caught between the delivery guide of stand A and the looper trough. The tip of his thumb required surgical amputation to the bone to allow for stitches.

An employee was helping another employee load stock material onto a press brake when the stock slipped. The injured employee's right index finger was caught between the press brake die and the stock, resulting in amputation at the first knuckle.

An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.

An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.

An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.