Struck by falling object unspecified · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Keystone Consolidated Industries, Inc., 7000 S Adams St, PEORIA, ILLINOIS 61641
on — Amputations, avulsions, enucleations unspecified, affecting the Finger or thumb tip(s), nail(s).
Final narrative
An employee was working to close a furnace door. The hydraulic mechanism that opens and closes the furnace door was non-operational and had been disconnected to allow the furnace door to be opened manually. As the employee was releasing the pins that held the door open, the door and the hydraulic cylinder fell, pinching their left hand between the hydraulic cylinder's base plate and the furnace. The employee suffered amputation of the little fingertip.
HospitalizedAmputation Finger or thumb tip(s), nail(s) Hydraulic and pressurized cylinders
More severe injuries at Keystone Consolidated Industries, Inc.
An employee was helping stack scrap wire. A fork truck was setting a carrier of scrap wire on top of another carrier. The scrap wire on the fork truck caught on the second carrier, and the carrier on the forks was pulled off. It struck the employee in the head, causing a concussion. The employee was hospitalized.
On July 7, 2025, at approximately 1:45 AM, an employee was moving vermiculite in a zinc pan with shovel. Molten zinc entered his left boot and caused burns to his shin and the top of his foot.
An employee was setting a floor plate on strand #2 while a rod in strand #1 cobbled at the break-out box and struck the employee's right foot. The employee sustained a puncture to their foot requiring surgery.
An employee was stringing wire around a drawing block at a wire machine. His left hand became caught between the wire and the drawing block, and he suffered an amputation to the ring fingertip.
On December 6, 2023, an employee's right hand was on the hinged side of a door jamb when the door closed, resulting in a partial amputation and a fracture to the right little fingertip.
An employee was walking past a crossover conveyor when a ramp came down and hit them in the back. The employee sustained a broken back vertebra, as well as a concussion, and was hospitalized.
An employee was unloading frameless mirrors from a trailer. When unstrapped, the mirrors fell over onto the employee, who suffered a skull fracture, a brain bleed and blood clot, a broken left ankle, and lacerations.
A temporary employee was rigging secondary steel when the steel joist fell to the ground and struck his lower left leg, resulting in fractures to the tibia and fibula.
Two maintenance employees were dismantling a machine part (steel cylindrical rollers) on the ground. After unbolting a portion, part of the assembly fell approximately 6 inches onto one employee's left little finger. The employee was hospitalized and about 3/4" of their little finger above the top joint was surgically amputated.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
A rolling mill was shut down due to a cobble between two mill stands. The injured employee was cleaning the cobble from the delivery side of stand A, while another employee went to the control panel to move stand B and stand A moved instead. The injured employee's right thumb got caught between the delivery guide of stand A and the looper trough. The tip of his thumb required surgical amputation to the bone to allow for stitches.
An employee was helping another employee load stock material onto a press brake when the stock slipped. The injured employee's right index finger was caught between the press brake die and the stock, resulting in amputation at the first knuckle.
An employee was loading a pallet. They stepped off the pallet and landed on shrink wrap, which caused them to fall to the concrete floor. The employee suffered a laceration on their head.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.