DENVER, COLORADO—
Cemco Steel Framing and Metal Lath
Injured by slipping or swinging object held by injured worker · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Cemco Steel Framing and Metal Lath, 490 Osage Street, DENVER, COLORADO 80204 on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Watch Cemco Steel Framing and Metal Lath — free
Get an email when a new federal OSHA severe-injury report for Cemco Steel Framing and Metal Lath is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was seriously injured after hitting the third digit on his right hand with a hammer. The employee suffered soft tissue trauma.
Similar incidents · Same event type
MATHIS, TEXAS—
Mako Contracting, LLC
An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.
TOPTON, PENNSYLVANIA—
East Penn Manufacturing
An employee was using a utility knife to cut honeycomb paper when the knife amputated their left index fingertip.
NEW LENOX, ILLINOIS—
Ash Brothers Fireplace and Chimney Co
An employee was cleaning a resident's chimney. While using a drill, the employee's glove became caught in the drill and their finger was fractured.
RAPID CITY, SOUTH DAKOTA—
RPM & Associates Inc
An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.
BLYTHEVILLE, ARKANSAS—
Tenaris Hickman
An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.
More severe injuries in this industry (NAICS 332322)
LA PORTE, TEXAS—
Channel Sheet Metal, Inc.
An employee was driving a forklift when its right front wheel dropped off a 6-inch curb. The forklift rolled over and trapped him against the concrete surface. He suffered a broken pelvis, ribs, and collarbone, as well as a collapsed lung.
COLUMBUS, OHIO—
Blackburn's Fabrication, Inc.
An employee was operating a brake press when the top die broke, causing the bottom die to roll out and onto the employee's legs. Both of the employee's legs were crushed below the knee, and both legs were partially amputated. The employee's left leg was also fractured above the knee.
AUSTIN, TEXAS—
Mason Road Sheet Metal, Inc.
An employee was performing routine maintenance on a shear machine when the machine's foot pedal was engaged and the blade contacted his right middle finger, resulting in a partial amputation.
ELK GROVE VILLAGE, ILLINOIS—
Rollex Corporation
An employee was helping to tighten down a metal packaging band for shipping. The metal band broke and struck the employee across their face, cutting their left face/eye area. The employee was hospitalized.
GALENA, KANSAS—
Kemlee Manufacturing Inc.
An employee was cutting plywood on a table saw. They went to retrieve a piece of wood and the saw blade partially amputated a fingertip.
More severe injuries in COLORADO
GREELEY, COLORADO—
ABC Supply Company
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
BOULDER, COLORADO—
Burke Builders Inc
An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.
LONGMONT, COLORADO—
Circle Graphics, Inc.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
DENVER, COLORADO—
FLATIRON CONSTRUCTION CORP.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
BURLINGTON, COLORADO—
Takkion OPS Management
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.