Caught in running equipment or machinery, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at USDA Agricultural Research Service, 1515 College Ave., MANHATTAN, KANSAS 66502
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee's right index finger was amputated at the second knuckle as the employee adjusted a drive belt that was slipping.
An employee was using a chemical cleaner to clear a restroom drain when he began coughing and having trouble breathing. He was hospitalized with a burned esophagus and lungs and respiratory distress.
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
An employee was on a four-step work stand while sanding an area of an aircraft. He was climbing down the work stand when he tripped over an air hose and fell to the level below, resulting in a fractured femur.
A Bureau of Land Management (BLM) employee was assisting a fire crew with clearing a forest trail. The employee was struck in the left leg by a fire-rated chainsaw. The chainsaw struck the employee underneath their chaps and above their boot. The employee was hospitalized and required surgery.
An employee handed a fuel hose to another employee at a gas station pump and then turned around, tripped over the hose, and fell to the ground. The employee was hospitalized with a fractured hip.
An employee was conducting fire suppression operations on a wildfire. He pulled a hose from the engine. He then charged the hose and began to put on his gloves. A flareup occurred and the employee sustained burns to his face and hands.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.