105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Haven Steel Products Inc

Fall to lower level unspecified · Fractures

Federal OSHA recorded a severe workplace injury at Haven Steel Products Inc, 13206 S. Willison Road, HAVEN, KANSAS 67543 on — Fractures , affecting the Trunk and other lower extremities.

An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.

Hospitalized Trunk and other lower extremities Portable ladders and stairs unspecified

Haven Steel Products Inc

An employee was working at a quench conveyor belt, pulling steel blades off the belt and placing them on the low heat belt. One of the blades fell off the quench belt onto the floor. The employee bent over to pick the blade up off the floor when another blade fell off the quench belt and struck them on the top of their head. The employee was hospitalized with a brain bleed.

View Haven Steel Products Inc's full OSHA safety record →

The Boeing Company

Two employees fell from an access bridge while entering an aircraft to perform maintenance. They landed on the ground about 20 feet below, where one of them lost consciousness. One employee sustained a fractured knee and another employee sustained a back strain/sprain. Both employees were hospitalized.

Lowe's Home Improvement

An employee climbed a racking system to retrieve decking. The employee fell through the racking and landed on the floor, resulting in a fractured right leg.

J&E Companies

An employee was on a scaffold installing a frame. He fell from the scaffold to the ground and sustained a fractured left wrist and bruises between his legs that were caused by his harness.

Fox Pest Control- Orlando West LLC

An employee was conducting pest control services at a customer's residence and went into the attic to locate a trap. The employee fell from the attic to the garage floor and sustained injuries to his back, ribs, lung, and pelvis.

THE HOME DEPOT, INC.

On October 30, 2024, an employee was removing a water-soaked ceiling tile while on a ladder. The tile fell out of the ceiling and the employee tried to get out of the way of the falling debris. He missed a step on the 6' ladder and fell to the floor. He struck his head and sustained an abrasion on his left arm and a rupture of his left patellar tendon.

Haven Steel Products Inc

An employee was working at a quench conveyor belt, pulling steel blades off the belt and placing them on the low heat belt. One of the blades fell off the quench belt onto the floor. The employee bent over to pick the blade up off the floor when another blade fell off the quench belt and struck them on the top of their head. The employee was hospitalized with a brain bleed.

Belleville International

An employee was operating a 32-ton mechanical power press performing a presetting function when a finger on his left hand was caught in the press and the fingertip was amputated.

AMERITOOL MANUFACTURING INC

An employee was charging a gas spring to pressure when the gas spring blew apart, injuring his right hand, left hand, and abdomen. The employee suffered the amputation of three fingers on his right hand and was hospitalized.

Quality Trailer Products

An employee was conducting a measurement setup on a parabolic eye forming apparatus. During the setup process, the forming assembly cycled and the employee's left index finger was crushed between the forming assembly and the die block. The employee sustained a laceration and fracture to the left index finger that resulted in medical amputation of the fingertip.

Faurecia

Two employees were performing a changeover of steel rolls/tooling. While one employee was pushing a metal roll stand back onto a shaft, the injured employee's left middle finger was caught between the metal spacer and the key-way of the metal stand. The fingertip was amputated.

Omya Inc.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

John Deere Coffeyville Works

An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.

Vestas-American Wind Tech

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

Alliance Ag and Grain LLC

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.

Foote Ranch Manhattan

An employee was helping to remove attachment forks from a loader. The attachment failed to come off. The employee went to shake the attachment as the loader lowered the forks. The employee's left index finger became caught under the attachment, resulting in a fingertip amputation.