CUSTER, WISCONSIN—
County Materials Corporation
Struck by falling object or equipment, n.e.c. · Soreness, pain, hurt-nonspecified injury
At a glance
Federal OSHA recorded a severe workplace injury at County Materials Corporation, 7477 Highway 10, CUSTER, WISCONSIN 54423 on — Soreness, pain, hurt-nonspecified injury, affecting the abdomen, except internal location of diseases or disorders.
Final narrative
An employee was working on a metal conveyor frame. He was cutting off the legs and set it down on saw horses. The frame fell off the saw horse and struck his body. He was hospitalized with abdominal injuries.
More severe injuries at County Materials Corporation
MARATHON, WISCONSIN—
County Materials Corporation
An employee was exposed to carbon monoxide that was leaking from a kiln. The employee lost consciousness and was hospitalized.
ROBERTS, WISCONSIN—
County Materials Corporation
At 10:00 a.m. on March 28, 2023, a side plate of a forklift lifting apparatus came loose at the bottom. An employee was reattaching the plate to the apparatus when the plate displaced and landed on his left foot, just beyond the steel safety toe. He suffered a partial amputation to the third toe.
CEDARBURG, WISCONSIN—
County Materials Corporation
Two employees were offloading 12-inch pipes from a truck at a construction site. They were operating the offloading mechanism when one employee's left little finger was pinched between one rolling pipe and the next. The finger was degloved and the fingertip was medically amputated.
JANESVILLE, WISCONSIN—
County Materials Corporation
An employee was making 12-inch by 32-inch concrete paver blocks. The employee was checking the blocks for cracks when the fingers cart cycled to collect a pallet of blocks from the stacker. The employee was caught between the fingers cart and the stacker and suffered fractures to the left wrist/arm, left side of the pelvis, and lower back.
SALEM, ILLINOIS—
County Materials Corporation
An employee was placing a chuck and strand into a stressing jack arm. The chuck and strand fell into the ram. The employee grabbed the chuck and tried to reposition it. At the same time, another employee was moving the ram down and the injured employee's right little pinky and ring fingers were pinched between the chuck and stressing ram. As a result, the employee's right pinky fingertip was amputated and right ring finger was cut.
View County Materials Corporation's full OSHA safety record →
Similar incidents · Same event type
PORT ALLEN, LOUISIANA—
Performance Contractors, Inc.
An employee was moving a piece of an I-beam for welding when it rolled off the cribbing. The employee went to catch it when it fell and crushed the employee's finger, resulting in a partial amputation.
KIRKSVILLE, MISSOURI—
WIRECO WORLDGROUP, INC.
An employee was helping to disassemble large reels used to store steel wire when a 264-pound flange from the reel fell over onto the employee's left leg. The employee sustained multiple fractures to their leg and ligament injuries to the lower leg.
GREENSBURG, PENNSYLVANIA—
Owens & Minor - Pittsburgh Distribution Center
The injured employee was putting away materials on the warehouse floor as a co-worker was pushing a pallet onto a nearby shelf. The pallet knocked another pallet forward, causing it to fall onto the injured employee's shoulders. The employee suffered fractures in their right and left knees and ankles.
FORT BLISS, TEXAS—
Retro Tech Systems
Employees were moving a single man lift into a building and reclining the lift to position it to fit through the door. The lift shifted and fell, causing the employee to sustain fractures to the left tibia and fibula. The employee was hospitalized and had surgery.
ORLA, TEXAS—
Creston Energy Group
An employee was moving a light tower so it could be hitched to a truck. He grabbed the tongue of the trailer hitch on the light tower to slide it to the left. The tongue jack fell off, causing the light tower tongue to drop on the employee's right hand. The employee's middle fingertip was amputated.
More severe injuries in this industry (NAICS 327320)
ROCHESTER, NEW YORK—
Cranesville Block Co. Inc.
An employee was walking through the garage and stepped on a mechanic's creeper. His feet went out from under him and he fell, sustaining a fractured right femur.
DICKINSON, NORTH DAKOTA—
Dickinson Ready Mix Co.
An employee was exiting a loader and coming down the ladder. His hand slipped off the railing and he fell backward onto sandy ground, landing on his side. The employee was hospitalized with a fractured pelvis and a rotator cuff tear.
OXFORD, MISSISSIPPI—
MMC Materials, Inc.
A concrete mixer truck driver was walking up the stairs of the slump rack. They fell from the slump rack platform and landed on the ground in the wash-out area. The employee sustained fractures to their left scapula and lower back vertebrae.
LITTLE ELM, TEXAS—
Rapid Redi-Mix LLC.
An employee backed their concrete truck into place to begin unloading it into a concrete pump unit. He exited the vehicle, and went to the rear to unload. When he began unloading, the truck rolled backward and pinned him against the pump unit. The employee sustained fractures to their pelvis, both femurs, both tibias and fibulas, and their left ankle.
OKLAHOMA CITY, OKLAHOMA—
Van Eaton Ready Mix, Inc.
A mechanic was changing out an air spring on a concrete mixer truck cab. The air spring was receiving higher air pressure than it was designed to use, because of a faulty level check valve. This increased pressure caused the air spring to burst. Its top portion separated and struck the employee's left forearm, causing a laceration and fracture. The employee was hospitalized, requiring surgery.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.