Struck by falling object or equipment, n.e.c. · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at County Materials Corporation, 1203 70TH AVE., ROBERTS, WISCONSIN 54023
on — Amputations, affecting the toes(s), toenail(s).
Final narrative
At 10:00 a.m. on March 28, 2023, a side plate of a forklift lifting apparatus came loose at the bottom. An employee was reattaching the plate to the apparatus when the plate displaced and landed on his left foot, just beyond the steel safety toe. He suffered a partial amputation to the third toe.
AmputationToes(s), toenail(s)Vehicle and mobile equipment parts, n.e.c.
More severe injuries at County Materials Corporation
Two employees were offloading 12-inch pipes from a truck at a construction site. They were operating the offloading mechanism when one employee's left little finger was pinched between one rolling pipe and the next. The finger was degloved and the fingertip was medically amputated.
An employee was making 12-inch by 32-inch concrete paver blocks. The employee was checking the blocks for cracks when the fingers cart cycled to collect a pallet of blocks from the stacker. The employee was caught between the fingers cart and the stacker and suffered fractures to the left wrist/arm, left side of the pelvis, and lower back.
An employee was placing a chuck and strand into a stressing jack arm. The chuck and strand fell into the ram. The employee grabbed the chuck and tried to reposition it. At the same time, another employee was moving the ram down and the injured employee's right little pinky and ring fingers were pinched between the chuck and stressing ram. As a result, the employee's right pinky fingertip was amputated and right ring finger was cut.
On July 1, 2019, an employee was using an air compressor to fill a forklift tire that was mounted to the forklift and attached to a single-piece rim wheel. While the employee was filling the tire it exploded and blew the employee back. The employee hit the wall and suffered a possible concussion.
An employee was moving a piece of an I-beam for welding when it rolled off the cribbing. The employee went to catch it when it fell and crushed the employee's finger, resulting in a partial amputation.
An employee was helping to disassemble large reels used to store steel wire when a 264-pound flange from the reel fell over onto the employee's left leg. The employee sustained multiple fractures to their leg and ligament injuries to the lower leg.
The injured employee was putting away materials on the warehouse floor as a co-worker was pushing a pallet onto a nearby shelf. The pallet knocked another pallet forward, causing it to fall onto the injured employee's shoulders. The employee suffered fractures in their right and left knees and ankles.
Employees were moving a single man lift into a building and reclining the lift to position it to fit through the door. The lift shifted and fell, causing the employee to sustain fractures to the left tibia and fibula. The employee was hospitalized and had surgery.
An employee was moving a light tower so it could be hitched to a truck. He grabbed the tongue of the trailer hitch on the light tower to slide it to the left. The tongue jack fell off, causing the light tower tongue to drop on the employee's right hand. The employee's middle fingertip was amputated.
More severe injuries in this industry (NAICS 327331)
On September 30, 2025, an employee was applying production labels to a splintered piece of pallet on a conveyor. Their right middle finger was caught as the split line exit conveyor moved forward, resulting in an amputation.
An employee was operating a pattern block roller machine. The employee was pinned (at the mid- to upper torso) between the pusher bar and the assembly platform. The employee suffered broken ribs.
Employees were chipping concrete/brick to separate a building for demolition when the wall collapsed and debris fell onto the employees, resulting in hospitalization of two employees. One employee sustained a fractured left femur and a head injury, and the other sustained a severe head injury.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.