105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Miron Construction Co., Inc

Injured by slipping or swinging object held by injured worker · Fractures

Federal OSHA recorded a severe workplace injury at Miron Construction Co., Inc, 500 Day Street, GREEN BAY, WISCONSIN 54302 on — Fractures, affecting the foot (feet), unspecified.

An employee was struck by an air hammer chisel, breaking a bone in his right foot.

Hospitalized Foot (feet), unspecified Chisels-powered

Miron Construction Co., Inc

An employee was using a circular saw to cut a 2 x 4 that was attached to a concrete form. They went to catch the off-cut material, and their left hand contacted the blade of the circular saw. The employee sustained the amputation of their ring finger and amputation of the middle finger including both knuckles.

Miron Construction Co., Inc.

An employee was bringing in a split bearing when his finger was caught between the bearing and the eye bolt that was holding the bearing. The employee's fingertip was amputated.

Miron Construction Co., Inc.

On December 1, 2022, an employee was in the process of taking down a damaged overhead garage door frame, when the door frame fell on their arm, resulting in a fracture requiring hospitalization.

Miron Construction Co., Inc.

On June 9, 2021, an employee fell through a hole in floor grating. The employee's arms broke the fall, causing a dislocation to the right shoulder.

Miron Construction Co., Inc.

An employee was walking during a demolition job when he tripped and fell onto the steel decking of the working surface he was on. He sustained several fractured ribs on the right side of the body, an injury to his right lung, and a laceration to the liver.

View Miron Construction Co., Inc's full OSHA safety record →

Mako Contracting, LLC

An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.

East Penn Manufacturing

An employee was using a utility knife to cut honeycomb paper when the knife amputated their left index fingertip.

Ash Brothers Fireplace and Chimney Co

An employee was cleaning a resident's chimney. While using a drill, the employee's glove became caught in the drill and their finger was fractured.

RPM & Associates Inc

An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.

Tenaris Hickman

An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.

Burke Builders Inc

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

Hobby Lobby Stores, Inc.

The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.

Cross Management Corp.

An employee was installing insulation in a wall when she tripped on a hole (12" deep) and fell, hitting her head on the concrete floor. The employee sustained fractures to her leg and wrist, and lacerations to her head. The employee was hospitalized.

STEEL STRUCTURES AMERICA INC

An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.

Trejo Concrete & Steel, LLC

An employee was operating a power drill when it slipped. The drill bit punctured the employee's hand and they were hospitalized.

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Asher Enterprises, Inc.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

Consolidated Electrical Distributors Inc.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.