Seaboard Foods

An employee was moving a dead animal using a removal cart. While transporting the animal, the cart tipped over and landed on the employee, resulting in a tibia fracture.

An employee was inside a livestock trailer that had just been cleaned. He was inspecting the trailer when someone called his name. He turned around, slipped, and fell out of the trailer. The employee landed on the concrete floor and sustained a broken wrist requiring surgery.

An employee was moving a 250-gallon tote of sodium hydroxide with a forklift. When the employee lifted the tote, the load shifted and fell forward into the building. The employee was attempting to pick up the lid that had fallen off of the tote when they were splashed with sodium hydroxide, resulting in chemical burns on their left scapula and the back of their left arm.

Two employees were repairing a slide gate at a feed mill. They were in a scissor lift extended to about 21 feet. A weigh lorry struck the lift and knocked it over. One of the employees fell to the ground along with the lift and suffered a broken right heel, as well as a concussion. The other employee did not sustain injury.

Two employees were performing maintenance on a jammed manual lift elevator door. The door dislodged and an employee's hand was pulled into the spring bindings connected to the door. Skin was amputated from the employee's left index finger.

An employee was walking back to her workstation. A forklift reversed a short distance, then completed a U-turn and struck her, running over her lower extremities. She was hospitalized with a broken ankle.

An employee was training on a jockey truck. Upon stepping out of the truck, the employee was struck by a rubber tire gantry crane, resulting in amputations of the right leg above the knee and left leg below the knee.

An employee was standing at the rear of a double pallet jack. Another double jack approached, and the employee's lower leg was caught between the two pieces of equipment. He suffered a broken tibia and fibula.

An employee was unloading large material bags on a loading dock. A forklift tine pinned the employee's foot against a pallet, causing the employee to fall and suffer a broken ankle.

An employee was pushing a container when they were struck by a forklift. The employee sustained a left leg fracture.

A temporary employee was working to unclog butter from a butter melter pump. His right index finger was caught in the machine, and the fingertip was amputated. The machine was energized at the time.

An employee working at the reject conveyor was placing a product guide bar on the conveyor. This metal guide bar is placed on the side of the conveyor belt to funnel the product, preventing it from falling off the sides. As he was getting the attachment positioned, his left ring finger was caught between the conveyor belt and the conveyor belt frame. The employee's finger was fractured and partially amputated.

An employee was using a pneumatic impact wrench to tighten bolts on a brake press anvil. The impact wrench hooked up on something, causing the tool to rotate. This spun his left hand with it. Their index finger was pinched between the side handle of the tool and an anvil bolt on the press, resulting in an open fracture. The employee required a medical amputation of the fingertip.

An employee was cleaning the area under a mobile elevated work platform. The platform lowered and struck the employee, resulting in a fractured right femur. The employee was hospitalized.

As an employee was opening an infeed valve. Hot tallow oil in the line above fell back down the pipe and came out of an open pressure relief valve, striking the employee on the thighs. The employee was hospitalized with second-degree burns to his thigh. Another employee sustained burns to their back but they were not hospitalized.

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.

An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.