Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at HALLMARK CARDS INCORPORATED, 101 MCDONALD DR., LAWRENCE, KANSAS 66044
on — Amputations, affecting the fingertip(s).
Final narrative
On or about 7/25/15, an employee's left ring fingertip was amputated while trying to clear a jam in a press in the production area.
AmputationFingertip(s)Presses-printing
More severe injuries at HALLMARK CARDS INCORPORATED
An employee was attempting to remove a jammed envelope from a press when their right hand was pulled into the rollers, crushing their thumb, index and middle fingers.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 511191)
An employee was setting up a display for party goods in a retail store. She stepped backward off the display base and fell 12 inches to the concrete floor. The employee sustained a fractured femur.
An employee was moving trash to a dumpster staged in the parking lot. The employee's foot got tangled in discarded wire and they tripped and fell on the ground, sustaining a broken leg.
An employee was moving empty pallets using a stand-up forklift when their left foot became caught between the forklift and the plastic aisle column protector. The employee was hospitalized with fractures to their toe, foot, and ankle.
An employee was attempting to remove a jammed envelope from a press when their right hand was pulled into the rollers, crushing their thumb, index and middle fingers.
An employee was walking outside to his car when he slipped on ice/slush and fell on the sidewalk. The employee went to get up and fell again, resulting in a right ankle/foot fracture.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.