NORTHPORT, ALABAMA—
Hanna Steel Corporation
Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Hanna Steel Corporation , 1701 Boone Boulevard, NORTHPORT, ALABAMA 35476 on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was cleaning the build-up off the tube mill roll with a rag. The rag pulled the employee's thumb into the nip point between the turkhead roll and the tube, amputating the left thumb.
More severe injuries at Hanna Steel Corporation
NORTHPORT, ALABAMA—
Hanna Steel Corporation
An employee was placing a board on top of a bundle of steel tubing. A crane was moving a bundle of steel that struck the employee and caught them against another bundle of steel tubing. The employee sustained a crushing injury and hematoma to the right upper leg.
NORTHPORT, ALABAMA—
Hanna Steel Corporation
An employee was helping a crane operator rig a chain around two bundles of steel tubing. The hoist was raised, and the employee's thumb was caught between the chain and a steel tube. The employee suffered a broken thumb and damage to the thumbnail.
NORTHPORT, ALABAMA—
Hanna Steel Corporation
An employee was cutting 6-inch round stock (steel) in a horizontal scissor-style band saw. A 16-inch long cut piece was being manually repositioned for lifting when it shifted. The piece caught the employee's left middle and ring fingertips against the frame of the band saw. The employee's middle fingertip was amputated. They also sustained a crushing injury to their ring finger and loss of a fingernail.
NORTHPORT, ALABAMA—
Hanna Steel Corporation
An employee was using an overhead crane to align a tooling rack. The employee's hand slipped and the tooling rack shifted, pinching his right fifth finger. The employee's fingertip was amputated.
NORTHPORT, ALABAMA—
Hanna Steel Corporation
An employee was handling scrap metal at a machine when they stepped on a piece of scrap metal and it punctured their right foot. The employee sustained a laceration to the foot.
View Hanna Steel Corporation 's full OSHA safety record →
Similar incidents · Same event type
CHICAGO, ILLINOIS—
DGS Import, LLC
An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.
SUWANEE, GEORGIA—
Millennium Mat Company
An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.
TAMPA, FLORIDA—
Bauer Foundation Corp.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
SUGARCREEK, OHIO—
Guggisberg Cheese, Inc.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
HOUSTON, TEXAS—
Alsco Inc.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 331210)
YOUNGSTOWN, OHIO—
Vallourec Star, LP
An employee fell onto a hot billet and suffered a burn to the left leg. The employee was hospitalized.
FREDONIA, NEW YORK—
The Tube Fabrication Company, Inc.
An employee was cutting wooden boards using a table saw when the glove on his left hand was caught by the blade, resulting in a partial fingertip amputation.
NORTHPORT, ALABAMA—
Hanna Steel Corporation
An employee was placing a board on top of a bundle of steel tubing. A crane was moving a bundle of steel that struck the employee and caught them against another bundle of steel tubing. The employee sustained a crushing injury and hematoma to the right upper leg.
SINTON, TEXAS—
Bull Moose Tube Company
A crane was hoisting a pipe. An employee was adjusting twisted lifting chains on the end of the pipe when the pipe was raised, causing the employee's hands to be caught between the chains and the pipe. The employee suffered injuries to the left index finger, left ring finger, right ring finger, and right index finger; the right index fingertip was amputated without bone loss.
HOUSTON, TEXAS—
Tex-Tube Company
During a routine inspection, an employee placed their hand on a pipe to check a weld. The pipe clamp activated, closed on the pipe, and trapped the employee's right middle finger, resulting in a partial amputation and fracture to the fingertip as well as a laceration to the ring finger.
More severe injuries in ALABAMA
GENEVA, ALABAMA—
Sysco Gulf Coast, LLC
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
BESSEMER, ALABAMA—
Norflex, Inc.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
ANNISTON, ALABAMA—
Ampler Pizza II LLC
An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.
ATMORE, ALABAMA—
Birdsong Corporation
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
ROGERSVILLE, ALABAMA—
Pilgrims
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.