Other fall to lower level less than 6 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Advanced Drainage Systems, Inc., 22793 Route 66, SHIPPENVILLE, PENNSYLVANIA 16254
on — Fractures, affecting the lower leg(s).
Final narrative
On August 9, 2015, at 11:30 pm, an employee was climbing a 5 foot fixed ladder attached to the reprocessing line when the employee slipped and fell to the concrete floor. The employee suffered two broken bones in the lower right leg and was hospitalized for surgery.
HospitalizedLower leg(s)Ladders-fixed
More severe injuries at Advanced Drainage Systems, Inc.
On 8/22/2025, an employee was working to clear a grinder jam. The employee was using a "no-touch tool" to rotate the drum of the grinder. He slipped forward and his right hand contacted a pinch point between the backside of the blade and the grinder housing. The employee's right middle fingertip was partially amputated with bone loss.
On May 2, 2025, at approximately 11:30 AM, an employee was using a hawkbill knife to cut plastic material off a die head when the knife slipped and lacerated their right knee. The employee was hospitalized and required surgery.
An employee was clearing a jam in a machine when their left little fingertip contacted the metal blade, resulting in the amputation of the first digit.
At 10:00 a.m. on January 9, 2025, an employee slipped on ice while walking through the yard to their truck. The employee fell to the ground and suffered a broken right femur. The employee was hospitalized.
An employee was using a lathe to sand down a shaft. Their glove got caught on the spindle and their hand and arm were pulled into the machine. The employee sustained a dislocated wrist, a dislocated little finger, and a fractured arm. The employee was hospitalized.
An employee was climbing a step ladder while carrying a 3-foot piece of conduit. As he went to reposition his feet on the ladder by pivoting, he slipped and fell from the third rung of a 6-foot ladder. The employee sustained fractures to the left femur, right elbow, and right ring finger.
An employee was descending a 4-step maintenance stand when she missed the bottom step and fell to the hangar floor. The employee suffered a left hip fracture.
An employee stopped a belt and was going to check it for missing packages. She fell backward 3-4 feet from an elevated platform and sustained a broken right arm.
An employee had just finished a routine concrete pour and was ascending the ladder to clean the concrete mixer truck. The employee lost their grip and fell approximately 2-3 feet, contacting the truck's bumper. The employee suffered rib fractures and a punctured lung.
An employee was performing duties as an expeditor. After opening the dock door, the employee scanned the barcode on the door of the truck and placed one foot on the truck and one foot on the dock. The truck drove out of the stall, causing the employee to fall 4 feet off the dock onto the concrete. The employee sustained fractures to the right side of the pelvis, elbow, and a left ring fingertip as well as injuries to the right wrist and bruising to the back and stomach.
More severe injuries in this industry (NAICS 325991)
An employee was working to unclog a feeder that feeds raw material into an extruder to make plastic/polymer. The slide gate closed on his right hand, amputating three fingers between the first and second knuckles as well as cutting the thumb tip.
An employee was operating an overhead crane and using a hoist to lower a metal tipper bin. The tipper lowered onto their right hand, crushing their right thumb and resulting in a fingertip amputation.
An employee was unclogging a granulator when the rotor pulled his fingers in. His left index, middle, and ring fingers, as well as his right thumb, index, middle, and ring fingers were amputated. The employee was hospitalized. The machine was not guarded at the time.
On March 3, 2025, two employees were working on a blender. The injured employee was removing contaminated pellets from the blender. Another employee went to elevate a tilter that was feeding the blender when the blender auger activated and crushed the injured employee's left leg. The employee's leg was medically amputated 4" - 6" below the knee. The machine was guarded at the time.
An employee was performing maintenance on a pelletizer. When they rotated the drum, their left index finger became caught between the pelletizer blades and the bed, resulting in a fingertip amputation.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.