Johns Manville (Inc.)

An employee was installing a belt onto the sheave of a fan motor. The machine was being rotated by hand to put a new belt in place when the employee's fingers got caught between the machine and the belt, resulting in a partial amputation of the little fingertip.

An employee slipped on a wet surface in a binder room area. He fell onto his right side, breaking his right arm/elbow. He was hospitalized.

On February 1, 2023, an employee and co-workers were performing maintenance on a board stacker by replacing the chain. They removed some slats to help guide the boards and pulled a pin on the coupling to the dual sprocket drive. The weight of the remaining slats then caused the chain to move up on the inside as the slats moved down on the outside. The employee's ring then became caught on the chain, resulting in the amputation of his left ring finger above his first knuckle.

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

On July 17, 2025, an employee was informed that the overtravel cable came off the wire rope drum. He went to unwind the rope drum. The bucket moved and caused the rope to tighten on the employee's right thumb, resulting in a partial amputation.

AN employee was working on the automated feed line when the pusher jammed. The employee cleared the jam, which caused the pusher to activate the press. The employee's right middle, ring, and little fingers were caught between the press mechanism and the material, resulting in amputations to the fingers.

An employee was walking down a ramp from a parking lot toward a building. The employee slipped on snow and ice and fell, suffering a back injury.

An employee was installing a belt onto the sheave of a fan motor. The machine was being rotated by hand to put a new belt in place when the employee's fingers got caught between the machine and the belt, resulting in a partial amputation of the little fingertip.

An employee was preparing a glass melter for extensive repairs. Water was being introduced into the melter with a lance to break up the hot glass. The water caused the molten glass to exit the melter with force, contacting the employee. The employee sustained thermal burns to their forearm, neck, and head.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.