Rehrig Pacific Company

An employee was moving a stair platform when his left little finger was caught between the platform and a hard surface. The employee sustained a partial amputation of the finger.

An employee was cleaning off a pallet sorting machine. The employee jumped approximately two feet from the top of the pallet sorting machine to a lower platform. Upon landing, the employee's left ankle rolled, resulting in a fracture that required hospitalization.

An employee was moving pallets. A pallet was dropped and crushed the employee's right thumb against a stacking machine. The thumb was broken.

An employee was operating the trash can injection mold machine and noticed that the hopper was jammed with plastic material. As the employee attempted to unjam the hopper, the blade amputated the fingertips on his left hand.

An employee was grinding bar stock on a bench mounted grinder and amputated their left thumb.

Employee 1 was operating a lift in a standing position. Employee 2 was operating a cherry picker and backing up through an aisle. The lift collided with the cherry picker and employee 1 fell off the lift after striking his right ankle on a wooden pallet that was on the cherry picker. The employee sustained a broken ankle.

An employee was operating a front-rider pallet jack from a freezer box to the loading dock when the vehicle collided with a stand-up forklift that was driving around a corner. The employee suffered multiple fractures in their left foot.

An employee was operating a forklift in reverse down an aisle when the vehicle collided with another forklift. The forks of the other forklift went into the employee's right leg, resulting in a right hairline leg fracture.

After moving empty containers with a forklift, an employee began to travel forward in the forklift. While re-entering the main aisle, the left fork struck the roll cage of an oncoming forklift that was travelling in reverse. This caused the injured employee's forklift to tip over onto a guardrail. The upper rail of the guardrail entered the top of the forklift's roll cage, pinning the employee's legs against the seat. The employee sustained a fractured leg.

An employee was operating a golf cart to retrieve and transport a ladder to the truck shop when they were struck by another vehicle at an intersection. The employee sustained head/brain injuries.

An employee was cutting wood with a miter saw when their clothing was pulled into the blade, resulting in a bicep laceration. The employee was hospitalized. The blade cover was not in place at the time of the incident.

Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.

An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.

An employee was operating a bubble wrap production line. He was splicing the ends of the film rolls together with tape when a driven roll contacted his hand. His hand and arm were pulled into the machine up to his shoulder. The employee's forearm contacted the the hot surface (230-500 F) of the bubble stamping cylinder. He was hospitalized with burns to the forearm that required surgery and crushing injuries to the hand and forearm without fractures.

An employee was operating a pallet dismantling saw. A board became stuck, and the employee tried to pull the pallet. When the board broke, the employee's right hand made contact with the blade, resulting in the amputation of the right middle finger above the second knuckle.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.