Design Distributors Inc.

An employee was using a dozer to clear a plot of land. The dozer struck the ground after getting stuck on a tree stump, causing the employee to hit their head on the cab roof. The employee sustained a spinal compression injury.

On August 31, 2023, an employee was operating an excavator to complete a demolition job. As the excavator drove into the first floor of the building, the floor collapsed. The vehicle and employee dropped approximately 8 feet, causing the employee to sustain a back injury.

An employee was standing on a walk-behind lawn mower when the mower spun out of control. His right ring fingertip became caught in the handlebar, resulting in an amputation.

An employee was loading a bundle of 3/8-inch rebar using a standup skid loader. While transporting the load, the equipment tipped forward, throwing the employee over the controls and into the mast of the skid loader. The employee sustained several teeth avulsions, a mouth laceration, and bruising/swelling around the face.

An employee was driving a forklift to deliver lumber to a work site when the forklift tipped forward onto the forks. The employee struck his head on a metal railing on the forklift, resulting in a laceration, a concussion, and temporary loss of consciousness.

An employee climbed on a pallet to retrieve a "load flag." He fell while dismounting the pallet and landed on his right side on the floor. The employee sustained a fractured hip.

Employees were changing out a rubber roller in a laminating machine. The injured employee was supporting one end of the rubber roller while the other end was supported by a forklift. The end held by the employee slipped and fell onto their other hand which was resting on the equipment frame. They sustained an open displaced fracture of the distal phalanx of the right middle finger as well as an amputation of the right middle fingertip.

An employee was unclogging a dust collector on a binder machine. The machine amputated the employee's left middle fingertip.

An employee was troubleshooting a varnish pump. He removed and replaced the pump. The pump was turned on and the pump impeller amputated his right middle fingertip.

An employee was packing boxes when a small package conveyor disconnected due to loose bolts and hit her thighs. She suffered temporary paralysis in both legs and a swollen muscle.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.