IRBY CONSTRUCTION COMPANY

An employee was servicing a utility line from the bucket of a bucket truck when the bucket contacted the cut-out switch at the top of the pole, resulting in an arc flash. The employee sustained flash burns on his face.

An employee was standing on the back of a boom truck helping the crew position a steel tower with a rope. As the employee was using the rope to guide the tower, the rope broke, causing them to lose balance and fall to the ground. The employee sustained a pelvic fracture and was hospitalized.

An employee was removing a shackle from the rigging holding a caisson that a digger was lowering onto a forklift. The caisson shifted and pinched the employee's fingers against the forklift. His right ring finger was amputated.

An employee was pressing a core on a power line conductor wire when the core gave way, causing the hoist to strike the employee's jaw. The employee sustained a laceration and was hospitalized.

An employee was stepping down from a tensioner machine when barricade material punctured his pelvic area. He was hospitalized.

An employee completed a shift during which she moved patient beds and stretchers. While at home, the employee experienced back pain and went to the hospital, where she was diagnosed with spinal fractures.

An employee was lifting and carrying a heavy box. After putting the box down, the employee had back pain and weakness in their left leg. They were hospitalized, having suffered a back sprain.

An employee sustained a lower back strain while assisting a client who was about to fall.

An employee was turning over a patient and felt a pull in her abdomen. The employee sustained a hernia.

An employee was working on the wharf recouping lumber boards (2x4s and 2x6s that can vary from 8' to 16' in length) from bundles that had become misplaced when they sustained a right rotator cuff tear requiring hospitalization.

An employee was troubleshooting the control setup for a variable air volume box above a ceiling. The employee's hand came into contact with an exposed, energized 277-volt wire that had loosened from its terminal on the box's assembly. He was shocked and fell off a ladder. His left hand passed across the ceiling grid and was lacerated. He also suffered an electrical burn to the right hand and was hospitalized.

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

An employee was standing on an A-frame ladder approximately 6 feet above the floor while he attached a suspended light fixture to the ceiling. The employee lost balance, and fell to the tiled floor below, sustaining blunt force trauma to his head.

An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.

The injured employee was performing routine maintenance on a fan belt/pulley. The injured employee and another person were moving the pulley back and forth manually to find a bearing issue. The injured employee's left ring finger got caught between the belt and the pulley wheel, resulting in a soft tissue amputation.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.