FAIRFIELD, MAINE—
Power Specialist Associates, Inc.
Other fall to lower level 21 to 25 feet · Fractures and dislocations
At a glance
Federal OSHA recorded a severe workplace injury at Power Specialist Associates, Inc., Route 201, FAIRFIELD, MAINE 04937 on — Fractures and dislocations, affecting the upper and lower limb(s).
Watch Power Specialist Associates, Inc. — free
Get an email when a new federal OSHA severe-injury report for Power Specialist Associates, Inc. is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was wire brushing the interior of the #1 recovery boiler's forced draft fan duct. He lost his footing, the fan blades moved, and he fell into the duct. He fell approximately 25 feet to the 10th level of the boiler. He suffered a compound fracture of the right leg and dislocated the right shoulder and elbow.
Similar incidents · Same event type
DENVER, COLORADO—
First Generation Masonry, LLC
An employee was getting a tool bag that was on a second-story roof when they fell from the roof to the ground. The employee was hospitalized with injuries to their rib cage and lower back.
BELVIDERE, ILLINOIS—
Midwest Seamless Gutters and Siding Inc.
An employee was installing a clip on the roof when they slipped and fell approximately 25 feet to the ground below, resulting in a broken hip, broken leg, and bleeding in the brain.
MEDINA, OHIO—
Warren Roofing & Insulating Co. Inc
An employee was setting up the worksite for the day. While moving an extension cord, he fell backward off the roof of the two-story building and sustained a broken pelvis.
DENVER, COLORADO—
Carrera Services Inc.
An employee was going up in a lift to begin trimming trees with a chainsaw. He was approximately 20-25 feet in the air when the latch to the bucket got caught and detached. The bucket then tipped causing the employee to fall to the ground. He sustained fractures to his right elbow, right wrist, and left femur.
CEDARBURG, WISCONSIN—
A&M Contractors
An employee was laying down felt paper on a new residential property when they fell approximately 21 feet to the ground. The employee sustained fractures of the L2 vertebra, right tibia, and left wrist as well as a left heel dislocation. The employee was wearing fall protection at the time.
More severe injuries in this industry (NAICS 811310)
BLYTHEVILLE, ARKANSAS—
NATIONAL MILL MAINTENANCE, LLC
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
OMAHA, NEBRASKA—
Elkhorn Mechanical and Combustion
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
NORTHLAKE, TEXAS—
Crown Lift Trucks
An employee was operating a lift truck when it struck a stationary lift truck. His left thumb was pinched between the two lift trucks, resulting in a partial amputation.
VALHALLA, NEW YORK—
Spellman High Voltage Electronics Corporation - Valhalla
An employee was disassembling a pressurized unit using a driver drill. When the unit was disassembled, it caused a kickback from the tube head, causing the drill to strike the employee's left forearm. They sustained a diaphyseal fracture to their left radius and ulna, which required surgery.
LAKE PANASOFFKEE, FLORIDA—
Ring Power Corporation
After repairing a piece of industrial equipment, an employee had brake-cleaning liquid on his gloves. A lighter ignited the liquid, and the employee's hands were severely burned.
More severe injuries in MAINE
SOUTH PORTLAND, MAINE—
HB Fleming, Inc.
A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.
SAINT ALBANS, MAINE—
GERRITY INDUSTRIES
Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.
AUGUSTA, MAINE—
O&P Glass
An employee was using a metal shear when it amputated the tip of his right index finger.
AUGUSTA, MAINE—
Cives Steel Company New England
An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.
BENTON, MAINE—
Longroad Energy
An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.