Central Park Conservancy

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

After completing a fitness test, an employee experienced lower leg pain and an inability to walk. The employee was hospitalized for compartment syndrome in both legs.

An employee was cutting up a large tree that had blown down on a rocky ledge on a hill. He began cutting on the uphill side of the tree, but due to obstructions he had to move to the downhill side. The tree separated from its 7-foot root ball, which started sliding toward him. While attempting to get out of the way, he tripped and fell to the ground, striking his head on an unknown object. As the root ball continued to move toward the employee, he made it below the level of the rock ledge. The root ball rolled over when it reached the ledge and pinned the employee's lower leg, and broke his fibula. He also suffered scrapes and bruises from the fall.

An employee was walking on a trail in a national park and stepped onto an angled and flat slab of granite when her ankle rolled and her weight shifted, but she did not fall. She was hospitalized with a fractured tibia and fibula and a dislocated ankle.

An employee was offroad, looking for a lost hiker. The employee fell off a canyon rim edge and landed on rimrock 5 or 6 feet below, suffering a separated shoulder and a head injury that required stitches. The employee was hospitalized.

An employee was preparing to conduct maintenance on a riding lawn mower and lifted the mower deck upward to its vertical position with assistance from another employee. A third employee pulled a locking pin, causing the front wheel mount to move forward into the cab. The cab entrance hand hold crushed the little fingers on the injured employee's hands. The employee was hospitalized and required surgical amputation of the right little finger to the second joint, as well as debriding and stitches to the left little finger.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.