Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at GM Fairfax Assembly & Stamping Plant, 3201 Fairfax Trafficway, KANSAS CITY, KANSAS 66115
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Watch GM Fairfax Assembly & Stamping Plant — freeGet an email when a new federal OSHA severe-injury report for GM Fairfax Assembly & Stamping Plant is published. One employer, no account, unsubscribe in one click.
Final narrative
Three employees attempted to repair a fill slide on the lower part of a die, which would not actuate during production. The lower die was mostly disassembled; it is air-powered when installed. They used air pressure to manually troubleshoot the issue. They further disassembled the die. The injured employee placed his hand on the die shoe, which activated the die, crushing his left-hand pinky and ring finger.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 336111)
An employee was using a battery-powered torque tool to fasten a bolt. The tool was activated and the socket of the tool rotated and pulled in their gloved left hand. The employee sustained a left index fingertip amputation.
An employee was inspecting a casted part that weighed 330 pounds. The part fell from a lift assist onto the employee, striking his upper right arm and head. He suffered burns to the upper right arm and was hospitalized.
On June 4, 2025, an employee was skimming molten aluminum when it dripped down from the skimming spoon onto the employee's left pant leg, burning the top of their left foot. The employee was hospitalized and required surgery.
On June 3, 2025, the injured employee was setting a mold with a co-worker when the mold was displaced and caught their right hand against the stop block. The employee sustained a fracture and partial amputation of their middle finger.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.