Frito LAY

An employee was unloading a truck. While walking out of the truck onto a loading dock, the employee tripped on a dock plate and fell forward into the facility, landing on their elbows. The employee suffered a broken left elbow.

An employee was working in the palletizing area, inspecting a right angle gear box when his left index finger was amputated at the middle knuckle by the timing belt of the gear box.

An employee was reaching down to grab a bag of chips to place it on the infeed conveyor for packing. The employee's hand contacted the edge of the conveyor and was pinched between the conveyor and the frame, resulting in an amputation to the right middle finger.

An employee was operating a stand-up forklift to pick up waste. The forklift was about to strike a bollard and the employee jumped off the vehicle. Her foot was then caught under the forklift s front tires, resulting in a fractured left heel.

An employee was trying to unjam boxes on a pick belt conveyor in a warehouse. The conveyor amputated the employee's left ring and little fingers at the first knuckle.

An employee was going to the breakroom when they tripped over a chair and fell, resulting in a hip fracture.

An employee arrived at work and was walking into the store through the parking lot. The employee tripped over a curb and fell to the ground, sustaining a femur fracture.

An employee tripped over a box and fell to the floor, fracturing their right arm.

An employee tripped over a piece of angle iron and fell to the floor sustaining a broken hip.

An employee was preparing for a CT scan when she tripped over a loose strap and fell to the floor, fracturing her hip.

An employee fell and broke his hip.

On August 21, 2024, at approximately 5:00 p.m., an employee was addressing a broken metal cable in a crane shuttle aisle. The crane shuttle unexpectedly activated, pinning the employee between the rail frame and crane shuttle. The employee was hospitalized with a dislocated and fractured hip as well as fractures to their clavicle and sternum.

An employee was cleaning a mixing machine with an air hose. Blades in the machine amputated two fingers on his right hand. The machine was not guarded at the time of the incident.

An employee was completing a post-trip vehicle inspection when he scratched his right leg on the step of the truck. The employee was hospitalized with cellulitis.

An employee was troubleshooting a seal wrapper machine when the sealer activated and amputated the employee's left middle and ring fingertips.

An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.

An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.

An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.