105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

WestRock

Compressed or pinched by shifting objects or equipment · Amputations

Federal OSHA recorded a severe workplace injury at WestRock, 1120 E. Clarendon Dr., DALLAS, TEXAS 75203 on — Amputations, affecting the fingertip(s).

Two employees were repairing a hub bearing. The machine was locked/tagged out and secured. The first employee attempted to line up the internal keyway slot by reaching in to feel the alignment. The second employee was manually tightening bolts to the hub adapter and when the external housing turned it amputated the tip of the first employee's right index finger.

Amputation Fingertip(s) Paper production machinery, unspecified

WestRock

An employee was clearing the clean-up chain with a stick when he fell backward into the cut-off saw area. His arm struck against the saw, resulting in severe lacerations. The machine was unguarded at the time.

WestRock

An employee was pumping overflowing process water when they stepped in an open hole containing hot process water, resulting in second-degree burns to their ankle.

WestRock

An employee was transporting a trash hopper to a dumpster using a forklift. While emptying the trash hopper into the dumpster, the employee's right hand was on the dumpster latch and his left hand was on the base of the hopper. When the employee released the latch, the hopper tilted forward while the rear of the hopper lifted upward, compressing the employee's left little finger between the hopper and the dumpster. The employee suffered a partial traumatic transphalangeal amputation.

Westrock

An employee was clearing a jam in a piece of equipment used to process paperboard scraps when their right hand contacted blades in the equipment, resulting in the amputation of two fingers.

Westrock

An employee was operating a gluer machine. The employee's left hand was caught in the feed section of the machine, resulting in the amputation of the hand.

View WestRock's full OSHA safety record →

TForce Freight

An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.

Liveo Research, Inc.

An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.

Best Pump and Flow

An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.

FORD MOTOR COMPANY

During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.

Lasseter Tractor Company. Inc.

An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.

International Paper - Mansfield Mill

An employee worked a shift and later experienced cramping in his arms and legs. He was hospitalized with dehydration.

International Paper - Mansfield Mill

An employee worked in the paper machine area for a shift, cutting corners off paper rolls around the roll machine. Afterwards, the employee sustained cramping and dehydration due to heat. The employee was hospitalized.

Newman & Company, Inc.

An employee was adjusting a trim sheet leading to a sheeter machine. Their glove became caught in the machine and the shearer closed on the employee's right hand, crushing it and breaking the hand and wrist.

Georgia Pacific Monticello LLC

An employee was troubleshooting a process upset. A nearby refiner had a pressure spike, causing the housing to separate slightly, which allowed the loss of primary containment. The employee was sprayed by hot water, resulting second- and third-degree burns on his torso and left arm.

Clearwater Paper Corporation

On July 22, 2024, at 10:30 AM, an employee was responding to a pulp mill manufacturing process shutdown. Pulp stock overflowed through an engineered overflow pipe resulting in a buildup of stock in a bermed area. The stock was 140 to 150 degrees. The employee went to the bermed area to close an air-actuated process valve. While closing the valve, pulp stock entered the top of his boots and caused second-degree burns to both of his lower legs down to his feet. The employee was hospitalized.

T G Meat Center LLC

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

Professional Flooring Supply

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

EnviroSafe Demil LLC

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

Inteplast Group

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

Regency IHS of Fairwinds Halletsville, LLC

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.