Caught in running equipment or machinery during maintenance, cleaning · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Royal Canin, 630 North Derby Lane, NORTH SIOUX CITY, SOUTH DAKOTA 57049
on — Fractures, affecting the hand(s), unspecified.
Final narrative
An employee was cleaning a running conveyor machine. The employee lost balance and put a hand up to catch themselves. The employee's hand and arm were pulled into the machine by a pulley, resulting in multiple hand fractures that required surgery. The pulley was unguarded at the time of the incident.
An employee was trying to remove a bag from a conveyor and caught her right hand between the guide roller and the conveyor when her hand slipped resulting in a laceration to the palm and back of her hand.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 311111)
An employee was working to remove a spatula that got stuck in an auger at the bottom of a hopper. The employee went to remove the face plate to help release the spatula. His fingers were in the holes to pull off the face plate when the machine actuated. His right middle finger got trapped between the face plate and the inner plate, resulting in amputation.
An employee was walking in a parking lot during break when they were struck by a vehicle, resulting in fractures to their left scapula and lower right leg.
An employee bent down to turn on an air valve, lost their footing, and struck their hand on a pressure relief valve while trying to catch themselves. The employee suffered an amputation to their right index fingertip.
An employee was working on a production line, packaging chews for animals. She retrieved a fallen cap for another production line from the floor and went to put in back in the machine it had fallen from (a capper). The machine caught the tip of her left little finger, causing a fingertip amputation.
An employee was taking apart the piping to a meat pump for clean-up. He saw food debris inside the pump housing and went to remove it. The meat pump rotor caught and severed his right index and middle fingertips, resulting in partial fingertip amputations.
An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.
An employee was walking past a crossover conveyor when a ramp came down and hit them in the back. The employee sustained a broken back vertebra, as well as a concussion, and was hospitalized.
An employee was using a hook tool to pull a pallet onto the lift gate of a tractor trailer. The hook detached from the underside of the pallet, causing the employee to fall backward off the lift gate. The employee landed on the concrete parking lot about 5 feet below, suffering fractures to the skull and two thoracic vertebrae.
An employee was walking on a truss table when he lost his balance and fell approximately 3 feet to the floor. The employee sustained a dislocated and fractured left ankle.