Contact with hot objects or substances · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Fisher Tank Company, AEP Power Station, FULTON, ARKANSAS 71838
on — Heat (thermal) burns, unspecified, affecting the ankle(s).
Watch Fisher Tank Company — freeGet an email when a new federal OSHA severe-injury report for Fisher Tank Company is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was mig welding on a vertical seam on a 137-ft-diameter, 40 ft.-high open-top above-ground steel storage tank when a piece of hot slag dropped down onto his right boot. His leg began swelling and he was later hospitalized with right ankle burns.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 332420)
An employee was standing on a 10-inch high working platform (36.75"x24"x10") verifying that tanks were being picked up properly by an overhead conveyor. The employee turned and was stepping off the platform when their left work boot caught the edge of the platform. The employee fell to the concrete floor and landed on their right side. The employee's right hip was fractured.
An employee was working on a vessel, attaching the base plate ring to the legs, when the base plate shifted about 3 inches. The employee's right foot became pinned between the base plate and the floor. Three toes were crushed. The employee was hospitalized and required surgery, resulting in partial amputation of their toe tips.
Two employees were constructing a 30-foot-tall aboveground storage tank, fitting a double roof on the tank. Half of the roof had been stitch-welded to the tank, and the employees were fitting/tacking down the second half of the roof, when the roof shifted and fell in. One employee fell and sustained fractures to their right foot and shin. The second employee suffered a broken back. Both employees required hospitalization.
Two employees engaged in a verbal altercation. The injured employee was punched in the face and fell, hitting their head on the concrete floor. The employee sustained a brain bleed and blunt force trauma to the face.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.