Contact with hot objects or substances · Second degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at YANCEY BROTHERS, INC., 4165 Mike Paggett Highway, AUGUSTA, GEORGIA 30906
on — Second degree heat (thermal) burns, affecting the face, unspecified.
Final narrative
An employee was using an oxygen and acetylene torch set to heat up the rollers on the excavator in order to change the tracks out on the equipment. While heating the rollers with the torch, the oil inside the rollers was heated. The pressure from the rollers and heat caused the heated oil to splash on the employee's face, causing second degree burns.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 423810)
An employee was working on a 6-foot ladder that was leaned against a gas compression engine. The ladder feet slipped on the working surface, causing the ladder to become unstable. The employee fell off the ladder and suffered bilateral wrist fractures.
An employee was reinstalling an idler weighing approximately 400 lbs. on a bulldozer when the idler shifted slightly, pinching the employee's finger. The employee sustained an amputation.
An employee was filling a pressure washer with gasoline when the vapors ignited, resulting in the employee suffering burns to his face, hands, and arms.
An employee was preparing to unload freight from the liftgate of their truck while at a client location. They stepped into a pothole and fell onto their left side, resulting in a broken hip that required hospitalization and surgery.
An employee was using a torch to remove a broken bolt from inside a roller drum. Prior to this, brake cleaner had been used inside the roller drum. The employee was inside the roller drum when a flash fire occurred and the employee sustained burns to their face and arms.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.