Exposure through intact skin, eyes, or other exposed tissue · Chemical burns and corrosions, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at TURNER INDUSTRIES GROUP, LLC, 5001 Fairield Road, PINE BLUFF, ARKANSAS 71603
on — Chemical burns and corrosions, unspecified, affecting the multiple body parts, n.e.c..
Final narrative
An employee was replacing a blow valve on a digester. The line was broken and was open for 15 minutes. When the employee returned to remove the two remaining bolts on the right side of the valve, the employee was exposed to black liquor from the paper processing line. The liquor came down and burned the employee's abdomen, left thigh, and both arms.
HospitalizedMultiple body parts, n.e.c.Chemicals and chemical products, n.e.c.
More severe injuries at TURNER INDUSTRIES GROUP, LLC
An employee had been spotting for an aerial lift. While the employee was moving to another area, the aerial lift ran over his left foot and broke the foot and ankle.
An employee was changing out old gaskets when hydrogen fluoride escaped from a line with residual pressure in the area and struck them in the face. The employee was hospitalized with chemical burns to their facial area.
An employee was adjusting a 36'' pipe wrench when a cable supporting a piece of pipe caused it to move forward and strike his face. The employee sustained a laceration and fracture to left eye area.
An employee was dismantling a scaffold when an arc from a nearby transformer contacted the pole the employee was removing. The employee suffered second-degree burns to his chest and arms and was hospitalized.
Employees were changing hoses in the loading rack. As they were gathering parts and changing out the cam lock fittings, the injured employee accessed the working platform and fell through the open grating. The employee sustained a head injury.
On November 27, 2023, an employee was emptying a 2-inch product line that transports sodium hydroxide liquid from a rail car to a 275-gallon tote tank. The nozzle came out of the tote and sprayed sodium hydroxide onto the employee's face. The employee was hospitalized with chemical burns to their face, mouth, and neck.
An employee was working with sulfuric acid as part of the production process. While transferring the chemical from a large container to a smaller container, it splashed on his body and hand, resulting in a chemical burn.
An employee knelt in wet concrete while performing work as a concrete finisher and sustained a chemical burn to the right shin. The employee was hospitalized and required surgery.
An employee was using a 5-gallon bucket to unload acid product from a tank. Residual product leaked into the containment area, causing the employee to sustain first- and second-degree burns to the chest, as well as third-degree burns to the arms.
An employee was transferring an alkaline cleaning chemical from a bulk container into 1-gallon containers. The employee lifted a gallon container by its label tag. The tag broke causing the container to fall approximately 14-18 inches. The container struck the ground and the contents splashed onto the employee causing chemical burns to their eyes.
More severe injuries in this industry (NAICS 811310)
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
An employee was operating a lift truck when it struck a stationary lift truck. His left thumb was pinched between the two lift trucks, resulting in a partial amputation.
An employee was disassembling a pressurized unit using a driver drill. When the unit was disassembled, it caused a kickback from the tube head, causing the drill to strike the employee's left forearm. They sustained a diaphyseal fracture to their left radius and ulna, which required surgery.
After repairing a piece of industrial equipment, an employee had brake-cleaning liquid on his gloves. A lighter ignited the liquid, and the employee's hands were severely burned.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.