Caught in running equipment or machinery, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Central Bag Company, 4901 S 4th Street, LEAVENWORTH, KANSAS 66048
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was adjusting a resin band with a bamboo knife when his hand was pulled into the fabric area. The lamination equipment pulled off part of his fingers (no bone loss).
HospitalizedAmputationFinger(s), fingernail(s), unspecifiedTextile, apparel, leather production machinery, n.e.c.
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
An employee was walking past stacked bales of fiber. A bale on the stack was moved, which caused another bale (weighing about 500 pounds) to fall 10-12 feet and strike the employee. The employee suffered right-side rib and leg fractures.
On 7/22/2025, an employee had been working outside with coworkers for roughly 4.5 hours, replacing fabric on awning frames. The temperature ranged from the mid 70 s to the low 80 s during this time period. The employee was hospitalized with heat stress and dehydration.
An employee was loading material and coming down from the trailer when he slipped off and fell to the ground. The employee was hospitalized with fractures and bruises to both wrists.
An employee was operating an empty forklift when it tipped to the side and fell over. The injured employee jumped out as it was falling and was crushed by the forklift, resulting in a hip fracture.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.