MILWAUKEE, WISCONSIN—
Cargill Meat Solutions Corporation
Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Cargill Meat Solutions Corporation, 200 South Emmber Lane, MILWAUKEE, WISCONSIN 53233 on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee shut off the screw conveyor to readjust the machine's lid and prevent ground meat from leaking onto the floor. As the employee was closing the cover of the screw conveyor, the passing fulcrum lever amputated his left ring fingertip.
More severe injuries at Cargill Meat Solutions Corporation
DODGE CITY, KANSAS—
Cargill Meat Solutions Corporation
A maintenance employee was called to look at a pallet conveyor machine where a chain had fallen off a sprocket wheel. When the employee grabbed the loose chain, a light sensor caused the machine to restart. This created a pinch point between the chain and sprocket that caught the employee's left little finger. The finger was surgically amputated at the second knuckle.
BUTLER, WISCONSIN—
Cargill Meat Solutions Corporation
A conveyor drive had been strapped to a lift for removal. As the drive was removed, the strap holding it shifted, causing it to swing. An employee's right hand was caught between the swinging drive and the frame of the conveyor, and the last joint of the little finger was amputated.
SCHUYLER, NEBRASKA—
Cargill Meat Solutions Corporation
An employee was unjamming a box coming from a case sealer when their right hand was caught in a conveyor belt. Their middle and ring fingers sustained amputations to the second knuckle.
SCHUYLER, NEBRASKA—
Cargill Meat Solutions Corporation
An employee had finished sharpening a knife on the grinding wheel and was returning it when he lost grip of the handle. As the employee reached to catch the it, his abdomen was lacerated by the knife blade in the right lower quadrant.
NORTH KINGSTOWN, RHODE ISLAND—
Cargill Meat Solutions Corporation
An employee was staging product on the shipping dock while operating a lift truck. As the employee was driving from the shipping dock to the finished goods warehouse, the lift controls began malfunctioning. The vehicle collided with a bollard and the employee's leg was caught between it and the vehicle, resulting in multiple leg, ankle, and foot fractures.
View Cargill Meat Solutions Corporation's full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 311611)
AMARILLO, TEXAS—
Tyson Fresh Meats, Inc.
An employee was scraping dried glue from the top lid of a hot glue pot. His left hand slipped and came into contact with the hot glue. He then suffered burns to his hands and fingers as he tried to remove the glue. He was hospitalized.
IDAHO FALLS, IDAHO—
Intermountain Packing, LLC
An employee was in a scissor lift approximately 20 feet above the ground to place a plastic tarp on a catwalk in order to catch condensation. They positioned the lift opposite the work area and stepped out of the scissor lift onto an I-beam. The employee fell from the I-beam to the ground. The employee was hospitalized with a skull fracture on the right side of their head and injuries to the chest and both eyes.
DODGE CITY, KANSAS—
Cargill Meat Solutions Corporation
A maintenance employee was called to look at a pallet conveyor machine where a chain had fallen off a sprocket wheel. When the employee grabbed the loose chain, a light sensor caused the machine to restart. This created a pinch point between the chain and sprocket that caught the employee's left little finger. The finger was surgically amputated at the second knuckle.
SOUDERTON, PENNSYLVANIA—
JBS Souderton, Inc.
The injured employee was standing by one of the stationary computers along the wall. There was a half-pallet located approximately 3 feet behind the employee that consisted of 12-pound boxes stacked six boxes high. A forklift was transporting a pallet that came in contact with the stationary pallet behind the injured employee, causing four boxes to fall and contact their legs. The injured employee was hospitalized with leg injuries.
CRETE, NEBRASKA—
Smithfield Foods
An employee was using a box strapping machine to place straps on boxes when his right middle finger was caught in the machine, resulting in an open fracture to the distal phalanx.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.