Caught in running equipment or machinery, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at UNYTITE, INC., 1 UNYTITE DRIVE, PERU, ILLINOIS 61354
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee's right middle finger was amputated at the first knuckle when the employee attempted to grab a part in the conveyor belt.
An employee was repositioning a washer on an assembly machine when the machine cycled and the employee's right index fingertip was caught and amputated.
An employee was operating a nut tapping machine, that cuts screw threads inside the nut, when the nut became jammed. As he tried to clear the jam, his gloved left hand became caught in the rotating nut tap. He suffered at least one fractured finger requiring surgery, with other fingers receiving lacerations. He was hospitalized.
A maintenance employee was repairing a tapping machine. He was working underneath the machine. To access the conveyor belt, he was moving a product tray out of the way by pushing it. The tray came off the guides and tilted, and his finger was caught between the tray and the machine, amputating his left middle fingertip.
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
An employee was drawing wire when a chain caught three fingers on his right hand. The employee sustained an amputation to the right ring finger, the fingerprint pad of the middle finger, and the tip of the index fingerprint pad.
An employee was buffing production parts and the rotating wheel contacted their left hand, resulting in hospitalization due to a laceration to the hand and a fracture to the hand and wrist.
An employee was repositioning a washer on an assembly machine when the machine cycled and the employee's right index fingertip was caught and amputated.
An employee was helping to remove a die from a press. The forks shifted on the forklift they were using and the die pinched their arm against the safety bar, resulting in crush injuries to the right hand, a fractured right radius, and a laceration requiring stitches.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.