1366 Technologies, Inc

On November 27, 2023, an employee was emptying a 2-inch product line that transports sodium hydroxide liquid from a rail car to a 275-gallon tote tank. The nozzle came out of the tote and sprayed sodium hydroxide onto the employee's face. The employee was hospitalized with chemical burns to their face, mouth, and neck.

An employee was working with sulfuric acid as part of the production process. While transferring the chemical from a large container to a smaller container, it splashed on his body and hand, resulting in a chemical burn.

An employee knelt in wet concrete while performing work as a concrete finisher and sustained a chemical burn to the right shin. The employee was hospitalized and required surgery.

An employee was using a 5-gallon bucket to unload acid product from a tank. Residual product leaked into the containment area, causing the employee to sustain first- and second-degree burns to the chest, as well as third-degree burns to the arms.

An employee was transferring an alkaline cleaning chemical from a bulk container into 1-gallon containers. The employee lifted a gallon container by its label tag. The tag broke causing the container to fall approximately 14-18 inches. The container struck the ground and the contents splashed onto the employee causing chemical burns to their eyes.

An employee was removing parts for replacement during equipment maintenance. His right forearm was exposed to a mixture of silicon dioxide (silica) and trichlorosilane that caused an exothermic reaction and chemical burns. The employee was hospitalized.

An employee's leg went through a part of the floor that was missing a floor tile and he sustained a dislocated shoulder while catching himself.

An employee positioned a pallet jack under a mobile TV stand to lift the stand and then clean the wheels. As the employee raised the pallet jack, the TV stand fell forward toward the handle of the pallet jack. The employee went to catch the TV stand and their right thumb became caught between the TV mount frame and the pallet jack, resulting in amputation.

An employee was working on the crimp machine when their left middle finger became caught in the machine. The employee sustained the amputation of the fingertip through part of the nail and was hospitalized. The machine was guarded at the time.

An employee was greasing the belt of an air handler and manually moving the belt when their left ring finger was caught between the belt and the pulley. The employee sustained a severe laceration to the fingertip that resulted in an amputation.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.