PJ Car Wash Park

An employee was going to fill a pallet with items from the warehouse. He was reaching for the handle of the pallet jack but unintentionally grabbed the throttle, causing the pallet jack to move and pin him against another pallet jack. The employee sustained a leg fracture.

An employee was loading merchandise onto rolling containers that were on a remote-operated order picker. While reorganizing merchandise to prevent top loading, the employee's wireless control device contacted a container and caused the order picker to move forward. The employee's right ring finger was caught between two containers and was amputated above the first knuckle.

The injured employee was operating an elevator at a construction site. He went from the tenth floor to the eleventh floor with a plumber and a scissor lift in the elevator. The plumber was using a remote to operate the scissor lift. As the scissor lift was exiting the elevator, a pipe that was on the scissor lift struck the injured employee's chest. The employee was hospitalized.

An employee was stepping off a pallet jacket when they fell backward. The throttle engaged and the vehicle ran over the employee's right ankle.

An employee was dismantling the engine from a vehicle. The vehicle slid off the loader and struck the employee, pushing him into his toolbox. The employee sustained a broken jaw.

An employee was changing the location of bolts that held a metal plate on the top of a car wash conveyor. His thumb became stuck between a part of the equipment and a roller on the conveyor. He sustained a fracture to the right thumb just above the base knuckle, resulting in an amputation.

An employee was walking on a carwash roller track when their right foot was caught inside the roller track equipment. The employee sustained torn ligaments and tendons, a partial degloving, and an arterial bleed in the foot.

On July 17, 2025, after someone reported a burning smell at the car wash exit near the washing machine, an employee was inspecting the area. When the employee touched the washing machine, he was electrocuted and hospitalized.

An employee came in early to use the air compressor to add air to one of his car's tires. While he was walking across the parking lot, the injured employee noticed a man sitting in the parking lot. The unidentified man rushed the injured employee and stabbed him three times in the back with a knife.

An employee was washing the tunnel equipment area using a sprayer and a chemical containing 5-10% hydrofluoric acid. The chemical seeped into his clothing and caused chemical burns to his abdomen and upper thighs. The employee was hospitalized.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.