Contact with hot objects or substances · Second degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at KIK Custom Products, 106 Central Avenue, CORTLAND, NEW YORK 13045
on — Second degree heat (thermal) burns, affecting the shoulder(s) and arm(s).
Final narrative
An employee was burned by 190-degree water while setting up a clean-in-place system. All valves were not closed during setup, and water sprayed out of a partially closed secondary valve. The employee suffered second degree burns on the arm and shoulder.
An employee was working in the blow mold bumper area loading a bottle. A delivery tube jammed and as the employee went to remove it, their right index fingertip was amputated.
While on a ladder, an employee was going to do a line break on a 2-inch PVC line of bleach (16% sodium hypochlorite) in order to repair a leak. The line was 8 feet above the ground. When the 2-inch PVC line was cut, the employee came in contact with the bleach, sustaining chemical burns on the upper body. The employee was hospitalized.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 325611)
An employee was using an electric pallet jack to retrieve a chemical tote from a staging lane. He inserted the pallet jack under the tote and began to back up. After moving backward for approximately 15 feet, the employee tripped on a collapsible tote. As he fell, the pallet jack ran over his left foot. His ankle was lacerated and his foot was fractured.
An employee was installing network infrastructure at a client's distribution center. He was transporting a box measuring approximately 23 inches by 12 inches to a truck yard and walking along a narrow path adjacent to a trench that measured approximately 5.5 to 6 feet deep, 10 to 12 feet long, and 18 to 24 inches wide. Gravel on the path shifted beneath the employee's foot, causing him to lose balance and fall into the trench. He landed on his left side and struck a 4-inch PVC conduit pipe located at the bottom of the trench. The employee was hospitalized with fractures to his fourth, fifth, and sixth ribs on the left side.
An employee mixed sodium hydroxide pellets into a 55-gallon drum of hot water. A chemical reaction occurred and mixture splashed out of the drum, causing burns to the employee's face and neck. Personal protective equipment was not in place at the time.
An employee was cleaning a centrifugal pump. As he was cleaning a nozzle, his hand was caught in the inlet of the pump. He suffered a partial fingertip amputation.
A line leader was crouched down observing the chain and sprocket on a carpet filling machine for maintenance or repair when another employee got his right index finger caught between the chain and sprocket. Skin and the fingernail were removed and the employee required surgical amputation of the fingertip to the first knuckle.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.