CHEROKEE BRICK & TILE COMPANY

An employee was feeding a band into a strapping machine when the machine reactivated and caught his left hand, crushing and lacerating it. The machine was unguarded at the time.

Employee sustained an amputation of two fingers when his hand was caught in the belt and pulley of the hammer mill.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was operating a slab line in a plant that produces 16" x 9" x 3" concrete slabs that weigh approximately 25-30 pounds. The employee went to adjust the chain and sprocket for the doubler that stacks the slabs two high, when their right middle finger was caught in the machine. The employee sustained a partial transphalangeal amputation of the finger.

An employee was packaging brick. A brick broke from the bundle and became lodged between the conveyor rollers. The employee was removing the brick when the bundle of brick shifted forward, catching his left index finger between the bundle and the conveyor roller and resulting in a partial amputation to the fingertip.

An employee was observing the operation of the stacker machine and climbed onto a platform to align bricks in the stacker. While the employee was on the platform, the machine cycled, striking and pinning him to the chain conveyor. The employee suffered abrasions on his arms and hairline fractures of his pelvis.

An employee was picking up broken bricks from the floor to throw into a hopper. A forklift reversed, and its counterweight struck the employee. The employee suffered a broken left foot, as well as injuries to the leg and ankle, and was hospitalized.

An employee was removing a belt from a motor on an extruder when his finger was pinched by the belt, resulting in an amputation to the first knuckle.

An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.

The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.

An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.