Pedestrian struck by vehicle backing up in nonroadway area · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at ACME Brick Company, 220 E. Daniels, DENTON, TEXAS 76205
on — Fractures , affecting the Foot (feet), toe(s) unspecified.
Final narrative
An employee was picking up broken bricks from the floor to throw into a hopper. A forklift reversed, and its counterweight struck the employee. The employee suffered a broken left foot, as well as injuries to the leg and ankle, and was hospitalized.
An employee was operating a transfer car when it stopped moving. He noticed that a brick had fallen and jammed. When he went to remove the brick with a shovel, the car started moving and caught his left foot against the pit's concrete wall. He suffered a fracture and lacerations to the lower left leg.
On July 2, 2025, an employee was walking to a building through a shed used to store dirt and went to climb a 45-inch pile of loose clay material when they tripped and fell forward. The employee sustained a dislocated right ankle, torn ligaments, a fractured tibia, and sprains to the right ankle and leg. The employee was hospitalized.
An employee was packaging brick. A brick broke from the bundle and became lodged between the conveyor rollers. The employee was removing the brick when the bundle of brick shifted forward, catching his left index finger between the bundle and the conveyor roller and resulting in a partial amputation to the fingertip.
An employee was emptying a small hopper into a larger hopper. When they pulled the return latch to return the small hopper to its original position, the employee's finger was caught between the hopper and the latch, resulting in an amputation to the distal phalanx.
An employee was packaging brick when a brick broke and became jammed between the back plate and the jig side. When the jig cycled, the broken brick caused the jig to buckle. As the employee was putting brick into the jig, his left wrist struck the outer side of the buckled jig, resulting in a contusion that required hospitalization.
An employee was diagnosing the cause of a rear light malfunction on a forklift when the reverse gear engaged. The forklift moved backward and contacted the employee causing a metatarsal fracture in their left foot and injury to their lower right leg.
An employee was collecting shopping carts in the parking lot when he was struck by a customer's truck as it was backing out of a parking spot. The truck pinned the employee's left leg against the cart mule they were using. The employee was hospitalized with a fractured leg and required surgery.
An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.
An employee took a picture of the seal and license plate on a delivery truck after loading. The truck then reversed back to the dock and pinned the injured employee against the dock. The employee sustained an abdominal fracture.
An employee was between a milling machine and an 18-wheeler belly dump when the 18-wheeler backed up and ran over his feet and legs. The employee was caught between the front of the milling machine and the truck. The employee sustained fractures to their hip, leg, and feet.
More severe injuries in this industry (NAICS 327121)
An employee was operating a slab line in a plant that produces 16" x 9" x 3" concrete slabs that weigh approximately 25-30 pounds. The employee went to adjust the chain and sprocket for the doubler that stacks the slabs two high, when their right middle finger was caught in the machine. The employee sustained a partial transphalangeal amputation of the finger.
An employee was packaging brick. A brick broke from the bundle and became lodged between the conveyor rollers. The employee was removing the brick when the bundle of brick shifted forward, catching his left index finger between the bundle and the conveyor roller and resulting in a partial amputation to the fingertip.
An employee was observing the operation of the stacker machine and climbed onto a platform to align bricks in the stacker. While the employee was on the platform, the machine cycled, striking and pinning him to the chain conveyor. The employee suffered abrasions on his arms and hairline fractures of his pelvis.
An employee was cleaning dust off the photo eye of the dump hopper when it activated and caught his left arm between the dump hopper and the frame of the machine. The employee sustained a left ulnar fracture, an elbow wound and traumatic muscle injury.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.