Caught in running equipment or machinery during maintenance, cleaning · Soreness, pain, hurt-nonspecified injury
At a glance
Federal OSHA recorded a severe workplace injury
at Federal Drier and Storage Company, 1155 US Hwy 165 N, ENGLAND, ARKANSAS 72046
on — Soreness, pain, hurt-nonspecified injury, affecting the leg(s), unspecified.
Final narrative
An employee was inside a grain bin sweeping down rice when his leg was caught in the operating sweep auger. He sustained severe leg wound injuries that required surgery.
HospitalizedLeg(s), unspecifiedAgricultural and garden machinery, n.e.c.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 493130)
An employee was helping clean the bag house. He checked under the auger in the dust collection system to feel for airflow. His right hand was sucked up into the auger blade, resulting in amputation of the middle finger to the distal joint. Surgery was required to amputate to the finger to the second knuckle.
On August 22, 2025, an employee was working to remove a blockage of grain from a spout in the basement. The gate was manually closed from the floor above to stop the flow of grain to the leg. The gate closed down on the employee, causing the amputation of their left middle fingertip.
An employee was walking with a pole hand tool when he slipped on fertilizer product that was on the floor and fell backward. The employee sustained fractured ribs and a collapsed right lung.
On June 22, 2025, at approximately 4:30 PM, an employee was working in a field with knife-style anhydrous applicator equipment used to fertilize corn. The employee inhaled anhydrous ammonia. The employee had difficulty breathing and speaking. They were hospitalized with a respiratory tract injury/irritation.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.