Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Xcel Energy Inc., 10163 Coton Creek Dr., HIGHLANDS RANCH, COLORADO 80130
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
With the assistance of a sling swing the employee was loading a big gas valve into a truck with his bare hands. During the loading, the sling rotated thus rotating the valve, which caused the employee to pinch his finger between the sling and the valve resulting in the amputation of his thumb just below the fingernail.
An employee was standing near a pile of power poles as they were being moved. The pile was disturbed and poles rolled toward the employee's leg. A pole broke the employee's lower leg.
An employee was walking back to his vehicle when he slipped and fell to the sidewalk landing on his back. The employee's back, shoulder, and neck were injured.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 221118)
An employee was operating a dump truck when the trailer door swung and pinched the employee's right middle fingertip underneath the nailbed, resulting in an amputation.
An employee was attaching a turnbuckle to an auger. The turnbuckle slipped and the employee's left thumb was pinched between the turnbuckle and the auger resulting in a partial amputation of left thumb.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.