Nissan North America

An employee was riding in the passenger seat of an industrial cart when their right foot struck a post, resulting in a broken right leg.

An employee's left ring fingertip was amputated by a dock locking device while the employee was loading a truck.

On 10/20/15, an employee fell backwards into an open pit 8-10 feet deep and fractured ribs.

A maintenance employee slipped from a railing 18 inches from the floor and fractured his elbow.

Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.

An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.

An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.

An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.

An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.

An employee was using a battery-powered torque tool to fasten a bolt. The tool was activated and the socket of the tool rotated and pulled in their gloved left hand. The employee sustained a left index fingertip amputation.

An employee was inspecting a casted part that weighed 330 pounds. The part fell from a lift assist onto the employee, striking his upper right arm and head. He suffered burns to the upper right arm and was hospitalized.

An employee was reaching to hook her harness into a lanyard and began to experience abdominal pain. The employee sustained an umbilical hernia.

On June 4, 2025, an employee was skimming molten aluminum when it dripped down from the skimming spoon onto the employee's left pant leg, burning the top of their left foot. The employee was hospitalized and required surgery.

On June 3, 2025, the injured employee was setting a mold with a co-worker when the mold was displaced and caught their right hand against the stop block. The employee sustained a fracture and partial amputation of their middle finger.

An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.

The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.

An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.